Rear brake callipers

[pimpdriver]

Have you thought of these???

http://homepage.internet.lu/customau..._v8.htm#BRAKES

Because, as you have found out, the rear calipers are crap.
see my thread:
http://www.classic-audi.co.uk/forum/...?t=7590&page=2

I got two 100s in a field in Wiltshire I am up there tomorow, both are non quattro though, 1990 models..... I am getting the wheels off one, so can have a look.

[Acidburn]

Originally Posted by pimpdriver

Have you thought of these???

http://homepage.internet.lu/customau..._v8.htm#BRAKES

Because, as you have found out, the rear calipers are crap.
see my thread:
http://www.classic-audi.co.uk/forum/...?t=7590&page=2

I got two 100s in a field in Wiltshire I am up there tomorow, both are non quattro though, 1990 models..... I am getting the wheels off one, so can have a look.

Thanks for the link and if you could find out that would be brilliant

[peanut]

doesnt the cable come in from the opposite side on the non quattros?

[pimpdriver]

The link in my post shows both types. I don't know the differences. But they are definitely different.

[amanda]

Originally Posted by Acidburn

Rear brake callipers/carriers from the following models:

A 100 1987-1988 100 avant
A10Q 1985-1988 100/avant quattro
A10Q 1988-1991 100/avant quattro
A10Q 1991-1992 100/avant quattro
A10Q 1993-1994 100/avant quattro
A20Q 1985-1988 200/avant quattro
A20Q 1988-1991 200/avant quattro
A6Q 1995-1995 A6/S6/avant quattro
A6Q 1996-1996 A6/S6/avant quattro
A6Q 1997-1997 A6/S6/avant quattro
A8 1994-1999 A8
A8Q 1994-1999 A8/S8 quattro
S6PQ 1997-1997 S6 plus quattro
V8 1989-1994 V8

what have you

Why not get a caliper repair kit?

[Acidburn]

Originally Posted by amanda

Why not get a caliper repair kit?

Because from what i've been told the above callipers will allow me to use vented discs ala RR20v rear setup but till I get a pair I won't be able to see.

I'd just like to make sure the car stops as well as i'm hoping it will go. I've already got porsche callipers for the front so would like to make sure the rear end is well up to the task.

Just trying to make sure the cars around for years to come.

[Twoqu]

Originally Posted by Acidburn

Because from what i've been told the above callipers will allow me to use vented discs ala RR20v rear setup but till I get a pair I won't be able to see.

I'd just like to make sure the car stops as well as i'm hoping it will go. I've already got porsche callipers for the front so would like to make sure the rear end is well up to the task.

Just trying to make sure the cars around for years to come.

Pete,

I have never seen a type 44 100/200q with a rear vented disc set up. The only one that would have had one as standard would have been the 200 20V which was never sold here in RHD. So thats an unlikely source!
So you want calipers/carriers from either V8/S4/S6/A8 or inded the RR if you want the 269x20mm rear set up. The A8 calipers would do althought the handbrake bracket will probably need opening up slightly.
Think I remember using S4 brackets/calipers and V8 rear discs. I believe only S4/6/V8/RR rear discs have the correct offset.

[Acidburn]

Originally Posted by Twoqu

Pete,

I have never seen a type 44 100/200q with a rear vented disc set up. The only one that would have had one as standard would have been the 200 20V which was never sold here in RHD. So thats an unlikely source!
So you want calipers/carriers from either V8/S4/S6/A8 or inded the RR if you want the 269x20mm rear set up. The A8 calipers would do althought the handbrake bracket will probably need opening up slightly.
Think I remember using S4 brackets/calipers and V8 rear discs. I believe only S4/6/V8/RR rear discs have the correct offset.

I know where there is a A8 sitting there I could get the callipers off next weekend providing the guy doesn't want the earth for them, I "may" know of an s4 that can donate them but will speak to the new owner tommorow (my old s4 thats now getting stripped )

Btw can you pm me your address on here, and i'll get them brackets out to you, sorry for the delay i've been in the process of moving.

[styler]

ya try custom car craft...... they are making after market ones...

[styler]

this is the site... need to get some for my 90 too .. http://sites.internet.lu/folders/cus...craft/main.htm