Rear brake callipers
 

Rear brake callipers/carriers from the following models:

A 100 1987-1988 100 avant
A10Q 1985-1988 100/avant quattro
A10Q 1988-1991 100/avant quattro
A10Q 1991-1992 100/avant quattro
A10Q 1993-1994 100/avant quattro
A20Q 1985-1988 200/avant quattro
A20Q 1988-1991 200/avant quattro
A6Q 1995-1995 A6/S6/avant quattro
A6Q 1996-1996 A6/S6/avant quattro
A6Q 1997-1997 A6/S6/avant quattro
A8 1994-1999 A8
A8Q 1994-1999 A8/S8 quattro
S6PQ 1997-1997 S6 plus quattro
V8 1989-1994 V8

what have you :tup:

anyone :tup:

i had to replace mine on my quattro urr been too that thay seize up alot and need replacing which was very expensive

try these guys

http://www.shewaltoncarspares.co.uk/contact.asp


what are these from?

1j0615123d CALIPER t OBS17 1 69.62 69.62 45.08
1j0615124d CALIPER a OBS17 1 69.62 69.62 45.08


taken from my list of parts from local dealer clear out/

Hmmm not sure on them part numbers, I use etka and I don't remember seeing any like that before, i'll have to try ask.

I'd just like to get a pair that I could clean up, the amount of cars that have these i'd have thought it would be easier, I missed a pair my mate sold recently.

what about 100 CS ones?

Creag has a well and truelly dead CS in his drive, Eltee is supposed to be collecting it but if it doesnt matter if the calipers need refurbed then these may tick a box?

thats some shopping list? why so many?

try Will on 07784549552

Ur quattro ones are on £85 from Pete Reeve...didnt think that was too bad a price...:D

Brake engineering in Wrexham made me a rear calliper for my 1985 cq quattro for £83.01! They said they had a lot of Audi callipers in stock too. It took them 2 days to sort it out and were very helpfull. It was ready to fit and had the VW/Audi stamps on. Didn't need my old item either!
Shaun.

Ive got a pair of rear calipers and carriers from an E reg A100 CS theyre any good. They were working fine about 3 months ago but have been sat around since, they will probably need a full refurb.

If you want them let me know, you can have em cheap!

Tim

My 200 just had a pair of break engineering ones on, they seem ok, but had to exchange on as the handbreake mechanism just didn't work! It was swapped without any bother though.