Heater fan speed problem

mjl16v · 22-01-09, 05:42 PM

I have 1989 old shape coupe heater fan speed 1 does not work 2 and 3 ok this is normally the resistor pack? Does this car have a resistor pack or is is part of the switch? Location? Also anyone got one for sale? Thanks. Matt

Micky · 22-01-09, 06:37 PM

i think it on the heater motor under the white plastic cover in the engine bay just under the wipers

MikeNZ · 22-01-09, 07:03 PM

It is the switch which is immendiately behind the fan knob (knob plugs into switch which is behind fascia), the lowest speed burns out eventually. Cure is new switch from dealer, and replacement is not difficult but fiddly.

Problem is not fan motor as it would not work at all. The fact it works on 2 and 3 shows it is OK.

mjl16v · 22-01-09, 07:11 PM

Ok so I need new fan speed switch. How much are these? Anyone got spare? Thanks.

steveb · 22-01-09, 07:14 PM

There is a resisitor on the motor as well it stopped the slow stopped on mine working,

22-01-09, 07:14 PM	#5
steveb Senior Member Classic Audi Club Member Join Date: Jul 2008 Location: West Berkshire Posts: 1,155	There is a resisitor on the motor as well it stopped the slow stopped on mine working, __________________ [FONT] '76 Leyland Princess 2200 HLS '79 Scirocco storm '84 WR '89 coupe quattro '01 A2 1.4 TDI SE '14 A3 1.4 TFSI COD [/color][/size][/font]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP! S.O.S. heater motor	baron2211	Parts Wanted	17	27-03-10 05:14 PM
Heater not working	deegee99	Electrical problems	19	05-02-10 04:05 PM
Would someone help me fit a new heater matrix??	SteveCat	General Chat	8	23-10-09 12:45 PM
heater matrix	ferris360	Engine	6	24-02-09 09:22 PM
Heater Fan Problem	one trick phoney	Electrical problems	4	25-09-08 10:45 AM

22-01-09, 06:37 PM	#2
Micky Mr Fifty Thousand! Classic Audi Club Member Join Date: Apr 2008 Location: Birmingham Posts: 8,738	i think it on the heater motor under the white plastic cover in the engine bay just under the wipers

22-01-09, 07:03 PM	#3
MikeNZ Grown up member Join Date: Jul 2008 Posts: 246	It is the switch which is immendiately behind the fan knob (knob plugs into switch which is behind fascia), the lowest speed burns out eventually. Cure is new switch from dealer, and replacement is not difficult but fiddly. Problem is not fan motor as it would not work at all. The fact it works on 2 and 3 shows it is OK.

22-01-09, 07:11 PM	#4
mjl16v Grown up member Join Date: Nov 2008 Posts: 41	Ok so I need new fan speed switch. How much are these? Anyone got spare? Thanks.