Classic Audi

Classic Audi (http://www.classic-audi.co.uk/forum/index.php)
-   Technical Info (http://www.classic-audi.co.uk/forum/forumdisplay.php?f=21)
-   -   KU engine fuel filter change (http://www.classic-audi.co.uk/forum/showthread.php?t=39708)

Ringmaster 03-05-21 03:43 PM
KU engine fuel filter change
 
Folks,

Want to change my fuel filter. Never done it before so looked at my old Haynes manual and it doesn't give any advice on changing the fuel filter on post 1985 C3s. It's as though it's not required. The filter is the metal canister type and has been there for years, so I think it deserves a change.

Do I have to replace the metal washers or can I re-use them?
Does the new filter need priming with fuel before fitting?

:tup:

John. 03-05-21 04:24 PM
Quote:
Originally Posted by Ringmaster (Post 466095)
Folks,

Want to change my fuel filter. Never done it before so looked at my old Haynes manual and it doesn't give any advice on changing the fuel filter on post 1985 C3s. It's as though it's not required. The filter is the metal canister type and has been there for years, so I think it deserves a change.

Do I have to replace the metal washers or can I re-use them?
Does the new filter need priming with fuel before fitting?

:tup:
If your fuel system primes for a few seconds when ignition turned on then give it a few on/off with the ignition.
Regards the washers, whatever seals ! I've seen me giving washers the annealing treatment before(not on an Audi however!), I think it's dependant on the filter being used ?

Worth doing for sure :tup:


All times are GMT. The time now is 10:13 PM.

Powered by vBulletin®
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna