compatible driveshaft bearing for 200 quattro
 

hello

the driveshaft bearing on my 200 quattro is "tired" :nonod: after 275 000km and 21 years old.

Audi, of course, doesn't sell the single part, and they propose me the complete drive shaft for more than 1200€ !! :shocked::shocked:

It seems that some drive shaft bearing from some BMW can be fit... ok, but which one ? there ar so many references ... :crazy:

I would like to know if it exists a 100% plug and play bearing ?? thank you for your experience

http://img11.imageshack.us/img11/8109/dscn8665b.jpg

if remember well bmw e30 1984-92 bearing will fit

If you can get the bearing size and if its just a case of pushing it out and a new one in, almost any bearing supplier should be able to match one up for you.

Youd need the inner bore, outer bore and width. Or just take the whole part along and see what they say.

Hi

The bearing seems to be OK.
If you have a look again, you can see that the rubber is completely distended.

I have ordered this reference from Meyle : 300 261 2194/S
http://bmwpartsonline.co.uk/siteimag...54/f_36577.jpg

this fits BMW serie 3 E36.

I am waiting for the part to prepare the interface bracket :tup:

or give pete a call at quattro corner