Wiring Loom for Electric Mirrors

Martc · 18-01-10, 02:09 AM

Is anyone willing to part with the piece of the electric wiring loom that connects from the electric mirror switch and goes through the door grommit to the round white multi plug that is located in the drivers footwell?

Its for a 1987 Audi Coupe Quattro (would assume its the same part on GT's and UR's)

Thanks

K Simmonds · 18-01-10, 08:35 AM

I've probably got such thing but off an 1990 Avant, wouldn't be surprised if that sub looms the same. There again it could be completely different, I'll see if I can extricate it latter and post some pic's of the connectors.

Martc · 18-01-10, 11:05 AM

Thanks - I do suspect they will be different though

Nigel Conniford · 18-01-10, 02:52 PM

Doh, your about 6 months to late, I throw the last remains of wireing from the quattro out back in the summer, the door looms were in there

Sos mate

Martc · 18-01-10, 03:08 PM

Quote:

Originally Posted by Nigel Conniford

Doh, your about 6 months to late, I throw the last remains of wireing from the quattro out back in the summer, the door looms were in there

Sos mate

No worries

Acidburn · 18-01-10, 06:15 PM

I'm not sure if I removed this from the coupe gt I had, ill have to have a look and see.

Puglife · 18-01-10, 07:35 PM

Got all the loom here mart... I'll make sure its tidy and intact before I confirm its available.

On a side note is there any interest for loom remanufacturing? I've got various sections of looms for URQ and CQ here that i've laid out incase I need to remake some.

Acidburn · 18-01-10, 07:37 PM

Quote:

Originally Posted by Puglife

Got all the loom here mart... I'll make sure its tidy and intact before I confirm its available.

On a side note is there any interest for loom remanufacturing? I've got various sections of looms for URQ and CQ here that i've laid out incase I need to remake some.

Can you do the loom for the diff lock panel, I need the sort that has the oil/volt and the button, not the two position dial sort.

Puglife · 18-01-10, 07:38 PM

I dont think i have that, i've only got WR and CQ looms to work from... If i can get hold of an MB loom with that diff panel I would be able to knock something together for sure

Martc · 19-01-10, 12:18 AM

Quote:

Originally Posted by Puglife

Got all the loom here mart... I'll make sure its tidy and intact before I confirm its available.

On a side note is there any interest for loom remanufacturing? I've got various sections of looms for URQ and CQ here that i've laid out incase I need to remake some.

Thanks Jay!

18-01-10, 11:05 AM	#3
Martc Black Coupe Collector Classic Audi Club Member Join Date: Feb 2008 Location: Towcestershiresheer Posts: 2,934	Thanks - I do suspect they will be different though __________________ 95 UrS6 87 Coupe Quattro

18-01-10, 02:52 PM	#4
Nigel Conniford Chief Sausage Meister!! Classic Audi Club Member Join Date: Jul 2007 Posts: 3,614	Doh, your about 6 months to late, I throw the last remains of wireing from the quattro out back in the summer, the door looms were in there Sos mate __________________ Horsepower is the force that determines at what speed you hit the wall, Torque is the force that determines how far you take the wall with you after you hit it.

18-01-10, 06:15 PM	#6
Acidburn The original sin Classic Audi Club Member Join Date: Jul 2007 Location: Swindon wiltshire Posts: 2,354	I'm not sure if I removed this from the coupe gt I had, ill have to have a look and see. __________________ 80 tdi avant

18-01-10, 07:35 PM	#7
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	Got all the loom here mart... I'll make sure its tidy and intact before I confirm its available. On a side note is there any interest for loom remanufacturing? I've got various sections of looms for URQ and CQ here that i've laid out incase I need to remake some. __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

18-01-10, 07:38 PM	#9
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	I dont think i have that, i've only got WR and CQ looms to work from... If i can get hold of an MB loom with that diff panel I would be able to knock something together for sure __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

18-01-10, 08:35 AM	#2
K Simmonds Senior Member Classic Audi Club Member Join Date: Dec 2009 Location: Mid Wales Posts: 1,060	I've probably got such thing but off an 1990 Avant, wouldn't be surprised if that sub looms the same. There again it could be completely different, I'll see if I can extricate it latter and post some pic's of the connectors.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1.9 TDi loom	turbopuika	Parts Wanted	0	13-12-09 02:24 PM
ur wr wiring loom & other bits	audicoupeparts	Parts For Sale	4	30-10-09 08:50 AM
Door mirrors	Booty	Parts Wanted	4	25-09-09 10:05 PM
Audi 80 2.6 v6 engine complete with wiring loom ECU ETC	john881000	Parts For Sale	0	11-05-09 07:25 PM
wiring electric recaro seats help	ferris360	Technical Info	4	19-04-09 08:51 PM