Wanted - SQ Parts

Tonks4x4 · 15-08-09, 09:22 AM

I am after the list of following parts if anyone can make enquiries. I have phoned Audi and they are NLA!!!! there's a surprise........

Dashboard SQ 859857039 5AY
Left wing corner 859803775
Right front wing corner 859803776
Left Front slam support 859805603
Right Front slam support 859805604
Under cross bar support 859805853
Slam Panel 859805591
Boost Guage 859919705

Even if anyone knows of any old stocks etc.
Or even if anyone has these bits for me to fabricate.....

It's hard to make things from just photographs......

Cheers chaps....

amanda · 15-08-09, 09:34 AM

Hmmmmm Have you tried Renn-tech in Ellesmereport, he has some audi sport stuff

He maybe able to help you

audicoupeparts · 16-08-09, 10:35 AM

he s been asking me for stuff!

Puglife · 16-08-09, 11:30 AM

Lower Cross bar support is £400+ from audi.... its a piece of 38mm tube with 4 bends and two mounting flange plates.... If you can get the measurements it would cost £30 to make yourself....

The slam panels dont look too complex either but you could do with some high def images of a genuine SPQ to get an idea of the form/size.

Have you asked anybody on the SPQ club? They are european but i'm sure if you ask nicely someone will oblige. I'll see what i can muster up for you.

Cornholio · 16-08-09, 11:40 AM

weren't the slam panels from the 100/200?

Tonks4x4 · 17-08-09, 08:28 AM

Yes I can make stuff I jest need some measurements and pics etc...

15-08-09, 09:34 AM	#2
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Hmmmmm Have you tried Renn-tech in Ellesmereport, he has some audi sport stuff He maybe able to help you __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

16-08-09, 11:30 AM	#4
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	Lower Cross bar support is £400+ from audi.... its a piece of 38mm tube with 4 bends and two mounting flange plates.... If you can get the measurements it would cost £30 to make yourself.... The slam panels dont look too complex either but you could do with some high def images of a genuine SPQ to get an idea of the form/size. Have you asked anybody on the SPQ club? They are european but i'm sure if you ask nicely someone will oblige. I'll see what i can muster up for you. __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'200 Avant parts wanted	whiffer	Parts Wanted	5	17-01-10 09:24 PM
1981 WR Parts Wanted	Phil Jameson	Parts Wanted	0	22-12-09 07:18 PM
86 audi 90 fwd parts wanted...	styler	Parts Wanted	0	07-07-09 03:15 PM
Wanted: Parts for 1983 Coupe Gt	ZermattGT	Parts Wanted	1	29-11-08 12:28 PM

16-08-09, 10:35 AM	#3
audicoupeparts Senior Member Classic Audi Club Member Join Date: Mar 2008 Posts: 1,161	he s been asking me for stuff!

16-08-09, 11:40 AM	#5
Cornholio Grown up member Join Date: Jul 2007 Posts: 555	weren't the slam panels from the 100/200?

17-08-09, 08:28 AM	#6
Tonks4x4 4 ring whore! Classic Audi Club Member Join Date: Oct 2008 Location: Huthwaite, Nottinghamshire Posts: 2,607	Yes I can make stuff I jest need some measurements and pics etc...