rear valance rep panel 90 quattro

newt · 21-04-09, 10:38 PM

im after a repair panel for the rear valance on an audi 90 type 85, hadrian list one up to 84 but mine is an 85 on a b is there a difference, iwould of thought the panel was the same for all the type 85 saloons
http://bap.dominohosting.biz/members...cument&Ret=ALL

quattrokid · 22-04-09, 02:13 PM

have you tried " Audi Bits2" on ebay? or vwaudisolutions?

ChrisG · 22-04-09, 07:31 PM

I'm sure they are different to the 1984 models but of coaurse you can also look for a panel listed for the 80 and if it is just the valence wouldn't need to be for a quattro either.
I know where there is an 80 body that you could cut one out of, car is near Bedford, in fact I expect you could have the whole car for £100, it's a 1.6 80 saloon minus lights and a few other bits.

newt · 22-04-09, 07:56 PM

yes the panels are the same for 80+90 and no they are not different for quattro, they are all the same part number as in the link, but the only part thats available is the upto 84 panel,
if i have to ill make it from scratch, but if i can find the correct repair panel it would make my life so much easier

ChrisG · 20-05-09, 03:50 PM

I could do with one of these now. Did you have any luck?

newt · 20-05-09, 09:30 PM

Quote:

Originally Posted by ChrisG

I could do with one of these now. Did you have any luck?

no im gonna fit the early panel and the early lower rear corners
i think the whole lot came to about 60 or 70 quid, but i have got a friend who works with sheet metal who is gonna try and make me the correct profile.

ChrisG · 21-05-09, 07:29 AM

OK
My Sport has gone to be tidied up around the rear ( shunted in it's early days and needed a new wing and rear panel)
Scabby around the rear arch and bits across where the the rear panel fits. My suspicions have been confirmed -- it was repaired, Audi approved bodyshop, very poor job and no seam sealer was used

Whilst they can improve matters considerably they would really like to fit a new panel to ensure longevity.

22-04-09, 02:13 PM	#2
quattrokid 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Ayrshire Posts: 9,654	have you tried " Audi Bits2" on ebay? or vwaudisolutions? __________________ RS4 B5 (wife's / ours now ) S3 8L Imola Yellow S3 8L Nogaro blue UrWR SOLD UrS4 saloon (SOLD again) S4 Cabrio (SOLD) A4 cabrio 2.5 V6tdi (SOLD) 80 cabrio 2.6 V6 SOLD 90 quattro 10v SOLD 100 2.2e SOLD FOUNDING MEMBER the 200,000 Plus miles Club

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audi 80 Rear Valance and new rear arches needed for my 80 quattro (1983)	1984AUDI80QUATTRO	Parts Wanted	2	25-10-09 06:56 AM
Audi 90-1987 onwards rear panel EBAY	BIGGYIN	General Chat	0	10-09-09 07:02 PM
B3 90 rear lamp panel	Tone	Parts Wanted	3	04-08-09 09:28 PM
1985/6 ( facelift ) 80 rear LH wing and rear panel	ChrisG	Parts Wanted	0	20-05-09 03:34 PM
Cabrio - 1995 Headlights & rear light panel	BigT80	Parts Wanted	4	05-04-09 10:02 PM

22-04-09, 07:31 PM	#3
ChrisG Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: Bracknell, Berks. Posts: 1,465	I'm sure they are different to the 1984 models but of coaurse you can also look for a panel listed for the 80 and if it is just the valence wouldn't need to be for a quattro either. I know where there is an 80 body that you could cut one out of, car is near Bedford, in fact I expect you could have the whole car for £100, it's a 1.6 80 saloon minus lights and a few other bits.

22-04-09, 07:56 PM	#4
newt Grown up member Join Date: Apr 2009 Posts: 143	yes the panels are the same for 80+90 and no they are not different for quattro, they are all the same part number as in the link, but the only part thats available is the upto 84 panel, if i have to ill make it from scratch, but if i can find the correct repair panel it would make my life so much easier

20-05-09, 03:50 PM	#5
ChrisG Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: Bracknell, Berks. Posts: 1,465	I could do with one of these now. Did you have any luck?

21-05-09, 07:29 AM	#7
ChrisG Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: Bracknell, Berks. Posts: 1,465	OK My Sport has gone to be tidied up around the rear ( shunted in it's early days and needed a new wing and rear panel) Scabby around the rear arch and bits across where the the rear panel fits. My suspicions have been confirmed -- it was repaired, Audi approved bodyshop, very poor job and no seam sealer was used Whilst they can improve matters considerably they would really like to fit a new panel to ensure longevity.