Centre bore on 4x100 GT Alloys

Save Ferris · 03-03-09, 01:19 PM

Ive measured the PCD on my GT alloys, and they are 4x100. Is the Audi centre bore the same as VW?
So I guess what I'm really asking is would Golf/Jetta/Passat etc.. Alloy fit straight on without any problems?

It's mainly out of curiosity at the moment, but if a nice set of 15's come along I could be tempted

Emjay · 03-03-09, 01:36 PM

They are called spigots. I believe they are 52mm from memory (but could be 57mm). If the spigot holes on your wheels are to big you can get adaptors (spigot rings) to bring the size down. If they are smaller then you can have the wheel machined to enlarge.

The critical point is the at the spigot and spigo hole size must match. If the hole is too big you will have very bad problems. The car will be undrivable and unsafe

Save Ferris · 03-03-09, 07:48 PM

Been doing a bit of googling and found that all Audi and VW (irrespective of the PCD) share the same centre bore of 57.0mm

moomin · 05-03-09, 07:59 PM

4x100 and 57.1 hub are shared by

vw
audi
bmw (older models)
vauxhall (some)
honda (some)
renault (a few)

Save Ferris · 05-03-09, 11:33 PM

Quote:

Originally Posted by moomin

4x100 and 57.1 hub are shared by

vw
audi
bmw (older models)
vauxhall (some)
honda (some)
renault (a few)

I know they share the same PCD, but BMW,Vauxhall,Honda,Renault do not share the same centre bore.

pimpdriver · 06-03-09, 06:46 AM

mini wheels (as in BMW ghey mini) are 57.0m 4x100.

I am surprised no-one has fitted any mini steels yet.....

I like G60 steels.......

moomin · 06-03-09, 05:49 PM

Quote:

Originally Posted by Save Ferris

I know they share the same PCD, but BMW,Vauxhall,Honda,Renault do not share the same centre bore.

oh really how come i have honda wheels on my golf and renault turbines on my caddy

Save Ferris · 06-03-09, 07:29 PM

Quote:

Originally Posted by moomin

oh really how come i have honda wheels on my golf and renault turbines on my caddy

You have them on because they fit. Obviously

But they do not share the same centre bore.

Anyway, before this gets anymore annoying...I'm looking to fit BBS RA's on my Coupe, Just need to wait for some nice ones to come along

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audi Ronal aero alloys centre caps	pimpdriver	Wheels & Tyres	0	29-11-09 08:19 PM
whats the centre bore of an opel manta??	dandan	Wheels & Tyres	7	27-11-09 10:12 PM
Centre console....	4v6	Parts Wanted	11	01-10-09 08:22 PM
4x100 alloys to fit a VW mk2 golf	Gaz	Parts Wanted	13	02-09-09 10:09 PM
4x100 alloys	my1303	Parts Wanted	2	18-11-08 07:21 PM

03-03-09, 01:36 PM	#2
Emjay Man Fettler Extraodinaire Classic Audi Club Member Join Date: Jul 2008 Location: Up my own arse blowing smoke Posts: 7,417	They are called spigots. I believe they are 52mm from memory (but could be 57mm). If the spigot holes on your wheels are to big you can get adaptors (spigot rings) to bring the size down. If they are smaller then you can have the wheel machined to enlarge. The critical point is the at the spigot and spigo hole size must match. If the hole is too big you will have very bad problems. The car will be undrivable and unsafe

03-03-09, 07:48 PM	#3
Save Ferris Grown up member Join Date: Feb 2009 Location: Petersfield, Hampshire Posts: 94	Been doing a bit of googling and found that all Audi and VW (irrespective of the PCD) share the same centre bore of 57.0mm

05-03-09, 07:59 PM	#4
moomin Grown up member Join Date: Jan 2008 Location: Canterbury, Kent Posts: 98	4x100 and 57.1 hub are shared by vw audi bmw (older models) vauxhall (some) honda (some) renault (a few)

06-03-09, 06:46 AM	#6
pimpdriver Devon Pastie Muncher Classic Audi Club Member Join Date: Jul 2007 Location: Calne Wiltshire Posts: 7,530	mini wheels (as in BMW ghey mini) are 57.0m 4x100. I am surprised no-one has fitted any mini steels yet..... I like G60 steels.......