alloy wheel spigot

[matt_c]

Im after a set of either plastic or alloy spigots to fit a set of AZEV-A's to an audi coupe quattro. Size required is 57.1 by 64mm but must have a triangluar shoulder/cross section.

I have crawled all over ebay and all i can get is a square sectioned spigot which fit the inner diameter of the alloy as its a sloped shoulder.

Any help gratefully received. matt

[Gaz]

Originally Posted by matt_c

Im after a set of either plastic or alloy spigots to fit a set of AZEV-A's to an audi coupe quattro. Size required is 57.1 by 64mm but must have a triangluar shoulder/cross section.

I have crawled all over ebay and all i can get is a square sectioned spigot which fit the inner diameter of the alloy as its a sloped shoulder.

Any help gratefully received. matt

Are these still evading you/me lol

[matt_c]

Originally Posted by Gaz

Are these still evading you/me lol

too right im struggling to find the correct angled profile.

[Gaz]

Originally Posted by matt_c

too right im struggling to find the correct angled profile.

Did u say you had 'one' made up already?

Is it normal for the center bore to have an angle/ ? What car did they come off originally? or should i say, what are they suppose to be designed to fit?

I'm also wondering if maybe I can get some made up myself?

[Gaz]

BuMpArOo!!!