Ronal alloy wanted 15"

John Favell · 21-09-08, 05:30 PM

I want an alloy wheel for my 1992 S2 coupe to use as a full size spare, it is 15" and has four bolt fasteners. many thanks.

MikeNZ · 21-09-08, 06:04 PM

A 4-bolt wheel on a S2? Coupes incl non-turbo quattro models had these but the S2 is 5-stud.

Isimmo · 21-09-08, 07:06 PM

Quote:

Originally Posted by MikeNZ

A 4-bolt wheel on a S2? Coupes incl non-turbo quattro models had these but the S2 is 5-stud.

Agree... Coupe will be 4X108pcd...... Unless type 81, then 4x100pcd...

S2 will be 5x112pcd....

John Favell · 22-09-08, 08:11 AM

Hi, many thanks for your expert reply, however my car is a S2 COUPE, it does have four bolts holding the wheel on, the PCD is 108 and the ET is 37. The rim size is 7J by 15 it says Ronal made in Germany on the outer rim, hope this clears up any doubts, cheers, John. PS. My home phone number for anyone with wheels to sell is 01626 332984, many thanks.

20vcqdriver · 22-09-08, 10:40 AM

Sounds to me as though someone has done a 20Vt conversion to a normal coupe quattro. All S2's came as standard with 16" wheels and 5 studs in order to accomodate the twin pot calipers...Does yours have the twin pots?!

MikeNZ · 22-09-08, 12:33 PM

Quote:

Originally Posted by 20vcqdriver

Sounds to me as though someone has done a 20Vt conversion to a normal coupe quattro. All S2's came as standard with 16" wheels and 5 studs in order to accomodate the twin pot calipers...Does yours have the twin pots?!

Definitely not a factory S2 Coupe. Either an engine conversion or it is a Coupe quattro with S2 badges on it. What type of engine has it got? Engine code?

S2 was never fitted with 7Jx15" four stud wheels from the factory - but as I said above the '88-on 5 cylinder non-turbo and 6 cylinder Coupe quattros were.

John Favell · 22-09-08, 06:39 PM

Hi Guys, the engine is a four cylinder 2.0 litre, it looks just like a VW golf engine that I had many years ago. The car is a 1991 registred vehicle on a K reg. It looks identical to the car at the bottom of the page in the Haynes manual no 1491 page no 4. sorry to be such a pain but I am new to Audis. Having been a Merc owner for the last 25 years having owned several and still do, I cannot believe the mickey mouse engineering in the Audi. For instance, the Mercs did not and will not ever fit a plastic cam drive belt, chains are the only reliable option. You need to be a contortionist to service the Audi, the Merc could be serviced wearing your best suit, Merc parts are also very cheap, just look in the German and Swedish cat. and compare. this should provoke some sort of discussion best wishes, John.

amanda · 22-09-08, 06:44 PM

Then it is not an s2

Emjay · 22-09-08, 06:47 PM

Quote:

Originally Posted by John Favell

Hi Guys, the engine is a four cylinder 2.0 litre, it looks just like a VW golf engine that I had many years ago. The car is a 1991 registred vehicle on a K reg. It looks identical to the car at the bottom of the page in the Haynes manual no 1491 page no 4. sorry to be such a pain but I am new to Audis. Having been a Merc owner for the last 25 years having owned several and still do, I cannot believe the mickey mouse engineering in the Audi. For instance, the Mercs did not and will not ever fit a plastic cam drive belt, chains are the only reliable option. You need to be a contortionist to service the Audi, the Merc could be serviced wearing your best suit, Merc parts are also very cheap, just look in the German and Swedish cat. and compare. this should provoke some sort of discussion best wishes, John.

welcome to the forum, thats why we love Audi's

John Favell · 22-09-08, 09:23 PM

Hi Amanda, if its not an S2 what is it? I bought it off an old guy who told me it was an S2, I had no reason to doubt him. I have bought parts for it telling them its an S2 and all the parts have fitted OK. I am very confused now. regards, John.

22-09-08, 10:40 AM	#5
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Weird Sounds to me as though someone has done a 20Vt conversion to a normal coupe quattro. All S2's came as standard with 16" wheels and 5 studs in order to accomodate the twin pot calipers...Does yours have the twin pots?!

22-09-08, 06:44 PM	#8
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Then it is not an s2 __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2003 A4 alloy wanted 16"	pimpdriver	Parts Wanted	3	07-01-10 01:31 PM
wanted ronal 4x108 15"	Micky	Parts Wanted	3	18-12-09 12:50 PM
Ronal Alloy Wheels 16" x 7J	hansport	Parts For Sale	0	02-10-09 08:16 PM
14" ronal alloy (one only)	Steve Hope	Parts For Sale	0	08-02-09 09:31 PM
Ronal 15" 16 spoke wheels wanted	ChrisG	Parts Wanted	20	22-09-08 01:00 PM

21-09-08, 06:04 PM	#2
MikeNZ Grown up member Join Date: Jul 2008 Posts: 246	A 4-bolt wheel on a S2? Coupes incl non-turbo quattro models had these but the S2 is 5-stud.

22-09-08, 08:11 AM	#4
John Favell Newbie! Join Date: Sep 2008 Posts: 5	Hi, many thanks for your expert reply, however my car is a S2 COUPE, it does have four bolts holding the wheel on, the PCD is 108 and the ET is 37. The rim size is 7J by 15 it says Ronal made in Germany on the outer rim, hope this clears up any doubts, cheers, John. PS. My home phone number for anyone with wheels to sell is 01626 332984, many thanks.

22-09-08, 06:39 PM	#7
John Favell Newbie! Join Date: Sep 2008 Posts: 5	Hi Guys, the engine is a four cylinder 2.0 litre, it looks just like a VW golf engine that I had many years ago. The car is a 1991 registred vehicle on a K reg. It looks identical to the car at the bottom of the page in the Haynes manual no 1491 page no 4. sorry to be such a pain but I am new to Audis. Having been a Merc owner for the last 25 years having owned several and still do, I cannot believe the mickey mouse engineering in the Audi. For instance, the Mercs did not and will not ever fit a plastic cam drive belt, chains are the only reliable option. You need to be a contortionist to service the Audi, the Merc could be serviced wearing your best suit, Merc parts are also very cheap, just look in the German and Swedish cat. and compare. this should provoke some sort of discussion best wishes, John.

22-09-08, 09:23 PM	#10
John Favell Newbie! Join Date: Sep 2008 Posts: 5	Hi Amanda, if its not an S2 what is it? I bought it off an old guy who told me it was an S2, I had no reason to doubt him. I have bought parts for it telling them its an S2 and all the parts have fitted OK. I am very confused now. regards, John.