2X Coupe GT`s breaking

g60go · 20-06-10, 08:50 PM

Today me and my mate got 2x coupe gt`s that i spotted on a guys drive a few yrs ago,we finally got round to knocking on his door and just in the nick of time saved them as he told us they were going to be scrapped,he said they were there,1 for 5yrs,the other for nearly 3! One is rough but perfect for parts,looks like it was a great car before it was parked up,the guy said he just left it there because the clutch pedal wasnt returning to its normal position once pressed,the other one is very rough but again,great for parts and is an auto,other than that they are exactly the same,the guy even has a brand new exhaust he bought he said we could have and even some new tyres but no good for what we want.We just want a few trim bits from them.We just need a couple of days to get them taken away and completely check them over,so if theres any bits u need then get in touch and i will get a list of peoples names and the parts u want and when we get them shifted this week i will get back to U!

g60go · 20-06-10, 09:13 PM

OK,to anyone who wants to know,the cars are an 84 and an 86,so the guy told me.They have the 1pc front lights.

4v6 · 21-06-10, 08:04 AM

Whats the gearshift mechanism like on the manual?

I need the entire interior mechanism with the ball etc as mines shot to bits.

g60go · 21-06-10, 08:14 AM

When u say yours is shot to bits,what do u mean exactly?If its just worn out and very loose,im sure u could just buy a bush kit for it to tighten everything up,or is there something broken? Im sure this one is fine,the guy used it everyday up until he left it there,but i will have to check for U!Like i said,i will need a few days to drag them down to work one at a time but i will stick your name down for this bit and check it for U!

4v6 · 21-06-10, 08:43 AM

Quote:

Originally Posted by g60go

When u say yours is shot to bits,what do u mean exactly?If its just worn out and very loose,im sure u could just buy a bush kit for it to tighten everything up,or is there something broken? Im sure this one is fine,the guy used it everyday up until he left it there,but i will have to check for U!Like i said,i will need a few days to drag them down to work one at a time but i will stick your name down for this bit and check it for U!

Cant get these any longer, its that old "nla" situation with the powers that be in Audi AY GEE.

If you take off the plastic trim surrounding the gearstick, the mechanism ( i need all of it) is right under there.
The ball is comprised of some rubber and plastic halves (iirc) and its mounting bracket to the body.
It all comes out in one lump (mine didnt!

) as its broken up.

Thanks again!

g60go · 21-06-10, 12:20 PM

OK no problem,i will take a look for U!

Acidburn · 21-06-10, 01:09 PM

What are you after for the lines from the power steering rack to pump to the brake master cylinder?

86audicoupe · 21-06-10, 02:05 PM

Hi there

What year is the auto? Is the front pipe in good condition? If so, how much is it? Oh...and dare I ask what the driver's seat is like?!!

Regards
Will

g60go · 21-06-10, 02:50 PM

Quote:

Originally Posted by Acidburn

What are you after for the lines from the power steering rack to pump to the brake master cylinder?

Bits like this im willing to let go cheap,just something to make it worth while for my time to remove them really.Do u want me to stick your name on one of them for these bits when we get them home?

Quote:

Originally Posted by 86audicoupe

Hi there

What year is the auto? Is the front pipe in good condition? If so, how much is it? Oh...and dare I ask what the driver's seat is like?!!

Regards
Will

The guy said the auto was an 84,but its been sat on his drive for 5yrs,so the exhaust will be knackered i`d expect,but he also said he has a brand new exhaust in the garage for one,but didnt say which one,i dont know if they are different!The drivers seats on both cars are worn on the outer edge,but the others look perfect,they would be useful to repair worn-out drivers seats!

Dablad75 · 21-06-10, 05:20 PM

Hi there, I'm after a drivers side electric window mechanism (motor, cables and regulator) and also could do with a drivers side headlight lens (just the silver bit as mines rusty) let me know a price if these are available - thanks a lot, Dave.

20-06-10, 09:13 PM	#2
g60go Grown up member Join Date: Jun 2010 Location: Isle of Man Posts: 224	cars! OK,to anyone who wants to know,the cars are an 84 and an 86,so the guy told me.They have the 1pc front lights.

21-06-10, 08:14 AM	#4
g60go Grown up member Join Date: Jun 2010 Location: Isle of Man Posts: 224	gear stuff When u say yours is shot to bits,what do u mean exactly?If its just worn out and very loose,im sure u could just buy a bush kit for it to tighten everything up,or is there something broken? Im sure this one is fine,the guy used it everyday up until he left it there,but i will have to check for U!Like i said,i will need a few days to drag them down to work one at a time but i will stick your name down for this bit and check it for U!

21-06-10, 12:20 PM	#6
g60go Grown up member Join Date: Jun 2010 Location: Isle of Man Posts: 224	parts OK no problem,i will take a look for U!

21-06-10, 01:09 PM	#7
Acidburn The original sin Classic Audi Club Member Join Date: Jul 2007 Location: Swindon wiltshire Posts: 2,354	What are you after for the lines from the power steering rack to pump to the brake master cylinder? __________________ 80 tdi avant

21-06-10, 08:04 AM	#3
4v6 Ex Member Classic Audi Club Member Join Date: Dec 2007 Posts: 5,565	Whats the gearshift mechanism like on the manual? I need the entire interior mechanism with the ball etc as mines shot to bits.

21-06-10, 02:05 PM	#8
86audicoupe Classic Audi Pervert! Classic Audi Club Member Join Date: Dec 2007 Location: Dorset Posts: 2,182	Hi there What year is the auto? Is the front pipe in good condition? If so, how much is it? Oh...and dare I ask what the driver's seat is like?!! Regards Will

21-06-10, 05:20 PM	#10
Dablad75 Grown up member Join Date: May 2010 Posts: 32	Hi there, I'm after a drivers side electric window mechanism (motor, cables and regulator) and also could do with a drivers side headlight lens (just the silver bit as mines rusty) let me know a price if these are available - thanks a lot, Dave.