torque tension for rear wheel bearing?

andya · 29-10-11, 10:47 AM

As in title, for my GT 86'.

many thanks
Andy

Phil Payne · 29-10-11, 11:04 AM

There isn't one, as such.

"Tighten the hub nut gradually while turning the thrust washer with a screwdriver tip. Do not bend or pry with the screwdriver. Tighten the hub nut to the point where the washer cannot be turned and back off slightly. Install the locknut and cotter pin."

andya · 30-10-11, 05:09 PM

Cheers Phil

Much appreciated. There was absolutely nothing in the haynes.

Andy

30-10-11, 05:09 PM	#3
andya Senior Member Classic Audi Club Member Join Date: Aug 2010 Location: Hampshire Posts: 1,149	Cheers Phil Much appreciated. There was absolutely nothing in the haynes. Andy __________________ 1985 Coupe Quattro 1986 Coupe 1.8 weber carb 1987 Coupe 2.2 GT

29-10-11, 11:04 AM	#2
Phil Payne Banned Join Date: May 2010 Location: Sheffield Posts: 1,809	There isn't one, as such. "Tighten the hub nut gradually while turning the thrust washer with a screwdriver tip. Do not bend or pry with the screwdriver. Tighten the hub nut to the point where the washer cannot be turned and back off slightly. Install the locknut and cotter pin."