Companies that supply lowering springs/shox for Audi's!

[16v80]

Originally Posted by BryFlyinBy

Also while I'm doing my homework - I'm starting to look at upgrading the brakes on my early GT5S. The rear has drum brakes either side of the beam, I'm sure I read somewhere on here MK2 Golf GTI disk brakes with 4x100 stud pattern will fit my beam - Is this true?? Please can someone help with this matter too??

Hi

Yes they will bolt on, I looked into this but I wanted to use the aluminium mk4 golf calipers, (hand brake is internal, better design) but i'm not sure what handbrake cables you need to use with either caliper tho, I think the later 86,87 year GTs came with rear discs, maybe these cables will work?.

[16v80]

Originally Posted by Audi Derek

Have a look here'


http://www.classic-audi.co.uk/forum/...ead.php?t=7459

..

Thanks, I wasn't too far off

[BryFlyinBy]

Originally Posted by 16v80

Hi

Yes they will bolt on, I looked into this but I wanted to use the aluminium mk4 golf calipers, (hand brake is internal, better design) but i'm not sure what handbrake cables you need to use with either caliper tho, I think the later 86,87 year GTs came with rear discs, maybe these cables will work?.

Thanks for your advise, out of interest what have you decided to run on your 80? did you use mk4 calipers ?

[16v80]

Originally Posted by BryFlyinBy

Thanks for your advise, out of interest what have you decided to run on your 80? did you use mk4 calipers ?

I havn't yet, If I do it I will try and use the mk4 calipers, for now I rebuilt the rear drums.

[pimpdriver]

for coilover advice look at Derek's website:

http://derekandrosesmotorsports.spor.../Upgrades.aspx

[DeeJayMan]

What do you think on this suspension to low my 100 typ43?

http://www.ebay.de/itm/Sportfahrwerk...ht_1639wt_1139

[S4_SAT]

Originally Posted by b2_sport

I have mailed MSW regarding these coilovers part number: W-23210301, to find out if they fit a 1986 B2 Sport.

Manufacturer : Weitec Suspension
Category : Weitec Ultra GT Kits
Sub-category : Weitec UGT - Audi
Application : 80/90 Saloon 1.3-1.8 8/79>8/86 (60/60mm)
Product Code: W-23210301
Details : Chassis type 81.
Lowering front/rear = 60/60mm.

Price: £277.96 inc VAT
Delivery: £13.50

Maybe someone here can tell if these will fit?

These aren't listed anymore Any recent updates?

[baron2211]

Originally Posted by Scarlet

Anyone give me links to adjustable ones for the t44 avant?

I want to lower it but also want to put big wheels on so want adjustables so i cna mess about with the look.

Got to be full sets though

You'll struggle getting any sizable wheels on a type 44 avant. the rear arches are extreemly restrictive, so the widest you can go is about 7.5 i think.

I lowered my type 44 200q Avant with a supersport kit from http://www.potn.co.uk/ they seem pretty good, and they were only £225 for four springs and four shocks. After fitting, the wallow reduced considerably. It lowers the car 45mm on the front and 35mm on the back. This is the lowest the back will go with standard arches. I like the nose down stance the kit gives the car too.

Good luck with your quest!

[1781cc]

full list:

http://motorsport-tuning.co.uk/onlin...23fd1f80b01d39

[buzzin]

Anyone used FK coilovers on your motors?

http://www.fk-shop.de/en/Suspension-Tuning/Coilovers/