Drive Shafts B3 Audi Coupe 20v 1991 FWD

Colin Aitchison · 20-11-16, 09:39 PM

Can any one confirm that the drive shafts on a B3 Audi Coupe 20v 1991 FWD are the same length or is there one long and one 30mm shorter.

Andy10v · 21-11-16, 09:36 PM

They are listed as left and right and have different part numbers.

You can run short ones all round if you machine spacers and use longer bolts to minimise spares required.

Colin Aitchison · 21-11-16, 11:14 PM

Thanks for that Andy, when are we going to catch up with you, it seems like it been over a year since we last spoke face to face, fancy coming to Morrison's at the Glasgow Fort on Sunday, I think we have a crowd coming to this month meeting, well 6 or 7 people.

Andy10v · 21-11-16, 11:43 PM

I know its been ages, life is even more up in the air just now, so unlikely I am afraid. I have not made Doune, Knockhill, Crieff etc, its pish but hey ho.

Should be 517mm and 531mm according to this thread

http://www.s2forum.com/forum/showthread.php?t=80304

21-11-16, 09:36 PM	#2
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	They are listed as left and right and have different part numbers. You can run short ones all round if you machine spacers and use longer bolts to minimise spares required. __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

21-11-16, 11:43 PM	#4
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	I know its been ages, life is even more up in the air just now, so unlikely I am afraid. I have not made Doune, Knockhill, Crieff etc, its pish but hey ho. Should be 517mm and 531mm according to this thread http://www.s2forum.com/forum/showthread.php?t=80304 __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

21-11-16, 11:14 PM	#3
Colin Aitchison Senior Member Classic Audi Club Member Join Date: Dec 2013 Location: Back home in Tillicoultry Posts: 1,308	Thanks for that Andy, when are we going to catch up with you, it seems like it been over a year since we last spoke face to face, fancy coming to Morrison's at the Glasgow Fort on Sunday, I think we have a crowd coming to this month meeting, well 6 or 7 people.