Free seat bits

[Davids]

After refurbing my driver’s seat I have the following bits free to anyone who wants to collect them, or they are going in the skip/tip

Not going to post at all unless you want to arrange someone to collect.

If you want to see the material type have a look at the seat rebuild thread I have just done.

Fitted to my 1991 Coupe

N/S coupe seat base frame, good condition, not broken or rusty. No foam, back or material on it.

O/S saloon base, covered and in not bad condition, no tears or wear thru on the bolster.

N/S back, covered, taken off the coupe base I used, Will check condition later on and send phots if reqd

Head rest of same material

O/S back cover, material removed from frame as I needed the frame.
No tears or wear thru the bolsters, no foam.

Going to the tip next week.

I did look at using the material to see if I could cover my door cards but there just isn't enough material.

[slacky]

Hi David , I would be interested in this if I could arrange a courier ?
Cheers Chris