Part's To Go (Cheap) - Page 6

nimz · 08-03-11, 09:12 AM

Quote:

Originally Posted by tommyboy

Hey mate..Not sure as it's from a differant chassis type. . Same as the coupe from 1980 to 1986 ( i think when they stopped making Gt5's)

It's One of those in this pic

Thanks Tommy, unfortunately it's not the one i'm after. Good luck with getting rid of all the parts.

Darron Edwards · 17-04-11, 07:14 AM

Hi, have you got drivers door window in green tint? Cheers

tommyboy · 17-04-11, 06:27 PM

Hey mate

i got the driver's window...not to sure of the green tint..quite dark were the car is stored. will double check tomorrow as i got to take out the window mechanism as well for Steve. If it's green tinted..pm me a offer..as it's worthless to me and the scrapheap.

Ginge

krzracingcouk · 20-04-11, 07:48 PM

Hi Tommy,

Do you still have the engine?

If so what condition is it in and how much (inc shipping) will it be? I only need the bottom block really but a third spare head will not go a miss.

Also if we can come to a deal on engine I will also take one of the dash setups.

tommyboy · 20-04-11, 09:47 PM

Hey bud

Yeah i still have the engine mate...Ill need ur post-code mate for accurate postage...also insurance etc. will be quite a lot for the distance between us...Yet if u still want it after the quote..i can throw in a free analogue dash bud.

The cylinder head is spoken for/reserved at the moment. have a KV head still for sale like.

Feel free to pm me bud. The engine block is on ebay...will need honing and work..but it's up for sale alot cheaper on thiefbay now ive updated it.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

krzracingcouk · 22-04-11, 08:31 AM

Already watching that one and posted about that one in my topic about the crack in block under the engien section.

Was it at injection engine or a carbed engine? I am after a carb'ed engine.

If you can quote for post code PL7 2AL (my shop addy) that would be great.

tommyboy · 22-04-11, 11:29 PM

It's a 2.1 Fuel injection ( K-jet ) Turbo block mate. If that's of any use to you bud ill get a quote for you early next week.
Ive also got a KV bottom end ..that's fuel injection 2.0 as well?

Regards

Tom

krzracingcouk · 24-04-11, 08:33 PM

The engine I have is a 1.9 Carbed 5 pot engine not injection.

If it is possile to use one the your bottom ends (excuse the saying

) with a standard Carbed head then yes please do get a quote.

tommyboy · 25-04-11, 02:26 PM

I dont think it will be mate..as the bottom end's are 2 litre injection..Am sure someone will know on here...I do doubt it tho bud

But i do have a full kv engine,cylinder head here. . inlet,and few other bit's and bob's if u fancy going the whole hog so to speak

17-04-11, 07:14 AM	#52
Darron Edwards Senior Member Classic Audi Club Member Join Date: Jul 2008 Location: Shropshire Posts: 1,855	Hi, have you got drivers door window in green tint? Cheers __________________ 1981 ur quattro CA chassis LHD 1982 ur quattro CA chassis RHD 1986 ur quattro GA chassis - Alpine White 1986 ur quattro GA chassis - Graphite Black

20-04-11, 07:48 PM	#54
krzracingcouk Grown up member Classic Audi Club Member Join Date: Aug 2007 Location: Plympton, Plymouth Posts: 471	Hi Tommy, Do you still have the engine? If so what condition is it in and how much (inc shipping) will it be? I only need the bottom block really but a third spare head will not go a miss. Also if we can come to a deal on engine I will also take one of the dash setups. __________________ Audi = Acceleration Under Demonic Infulence Current Car - Audi Coupe GT 5S 1982 Model Mark 1 Been in the family now for 30+ years. Restoration Thread Also Weekend Cars - Audi A4 Touring Car, Audi A4 DTM

22-04-11, 08:31 AM	#56
krzracingcouk Grown up member Classic Audi Club Member Join Date: Aug 2007 Location: Plympton, Plymouth Posts: 471	Already watching that one and posted about that one in my topic about the crack in block under the engien section. Was it at injection engine or a carbed engine? I am after a carb'ed engine. If you can quote for post code PL7 2AL (my shop addy) that would be great. __________________ Audi = Acceleration Under Demonic Infulence Current Car - Audi Coupe GT 5S 1982 Model Mark 1 Been in the family now for 30+ years. Restoration Thread Also Weekend Cars - Audi A4 Touring Car, Audi A4 DTM

24-04-11, 08:33 PM	#58
krzracingcouk Grown up member Classic Audi Club Member Join Date: Aug 2007 Location: Plympton, Plymouth Posts: 471	The engine I have is a 1.9 Carbed 5 pot engine not injection. If it is possile to use one the your bottom ends (excuse the saying) with a standard Carbed head then yes please do get a quote. __________________ Audi = Acceleration Under Demonic Infulence Current Car - Audi Coupe GT 5S 1982 Model Mark 1 Been in the family now for 30+ years. Restoration Thread Also Weekend Cars - Audi A4 Touring Car, Audi A4 DTM

17-04-11, 06:27 PM	#53
tommyboy Senior Member Join Date: Jun 2009 Location: Turriff.Aberdeenshire.Scotland Posts: 1,053	Hey mate i got the driver's window...not to sure of the green tint..quite dark were the car is stored. will double check tomorrow as i got to take out the window mechanism as well for Steve. If it's green tinted..pm me a offer..as it's worthless to me and the scrapheap. Ginge

20-04-11, 09:47 PM	#55
tommyboy Senior Member Join Date: Jun 2009 Location: Turriff.Aberdeenshire.Scotland Posts: 1,053	Hey bud Yeah i still have the engine mate...Ill need ur post-code mate for accurate postage...also insurance etc. will be quite a lot for the distance between us...Yet if u still want it after the quote..i can throw in a free analogue dash bud. The cylinder head is spoken for/reserved at the moment. have a KV head still for sale like. Feel free to pm me bud. The engine block is on ebay...will need honing and work..but it's up for sale alot cheaper on thiefbay now ive updated it. http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT

22-04-11, 11:29 PM	#57
tommyboy Senior Member Join Date: Jun 2009 Location: Turriff.Aberdeenshire.Scotland Posts: 1,053	It's a 2.1 Fuel injection ( K-jet ) Turbo block mate. If that's of any use to you bud ill get a quote for you early next week. Ive also got a KV bottom end ..that's fuel injection 2.0 as well? Regards Tom

25-04-11, 02:26 PM	#59
tommyboy Senior Member Join Date: Jun 2009 Location: Turriff.Aberdeenshire.Scotland Posts: 1,053	I dont think it will be mate..as the bottom end's are 2 litre injection..Am sure someone will know on here...I do doubt it tho bud But i do have a full kv engine,cylinder head here. . inlet,and few other bit's and bob's if u fancy going the whole hog so to speak