Home | Register | FAQ | Members List | Calendar | Today's Posts | Search |
Social Groups |
Registered
Members: 13,544 | Total Threads: 40,056 | Total Posts: 470,823 Currently Active Users: 749 (16 members and 733 guests) Welcome to our newest member, utobiaz |
|
|
Thread Tools | Display Modes |
03-06-16, 11:49 AM | #1 | |
Grown up member
Classic Audi Club Member
Join Date: Sep 2011
Location: Back in the Emerald Isle
Posts: 772
|
A3/A4 chrome exhaust tips
|
|
03-06-16, 06:51 PM | #2 |
Senior Member
Join Date: Nov 2014
Posts: 1,650
|
Have one of these on my boy theschmallfella...
it's starting to look a bit manky though, and Autosol doesn't seem to be doing a very good job in so far as cleaning it up, so I might take one off your hands buddy. Need to check to see if mine has a part number stamped on it, and I'll also measure it up in view of the fact that my boy is an 80 and not an A3/A4. In the meantime, whats the diameter and length of the one's you have please? |
03-06-16, 07:05 PM | #3 |
Grown up member
Classic Audi Club Member
Join Date: Sep 2011
Location: Back in the Emerald Isle
Posts: 772
|
Hey Missy! I don't mind splitting them up, no ones asked about them yet so you have first dibs! Tip to tip it's 160mm long, 75mm wide and it's made to fit a 60mm pipe, I must check that just to be sure. Does that help?
|
04-06-16, 07:39 AM | #4 |
Senior Member
Join Date: Nov 2014
Posts: 1,650
|
Thinking about it theschmallfella...
I'm not sure that I'll be able to measure the tip & pipe diameters with the tip fitted, and it's certainly not guna come off easily as it must be about 10yrs since I had the back box replaced, so I'll take the tip and pipe circumference measurements (where they both meet) instead and get back to you - hopefully later today, if it ever stops p'ing it down! |
04-06-16, 12:19 PM | #5 |
Senior Member
Join Date: Nov 2014
Posts: 1,650
|
Have taken some measurements now theschmallfella...
Current tip -> Cant see a part number. Length (from top lip) 143mm, (from bottom lip) 115mm Circumference 255mm, converter states 81.17 diameter Exhaust pipe -> Circumference 160mm, converter states 50.92 diameter. So, looking at your own mesurements, I think yours will be too big. |
Bookmarks |
|
|