Home | Register | FAQ | Members List | Calendar | Today's Posts | Search |
Social Groups |
Registered
Members: 13,707 | Total Threads: 40,056 | Total Posts: 470,826 Currently Active Users: 708 (19 members and 689 guests) Welcome to our newest member, otuteoveyazi |
|
|
Thread Tools | Display Modes |
12-05-20, 08:59 AM | #21 |
Grown up member
Classic Audi Club Member
Join Date: Jan 2013
Posts: 94
|
It is pretty straight forward, although I’ve never done a belt before!
I do all my own maintenance. I always left this for a mechanic. I followed the basic rules of making sure all the marks line up when rotating the engine by hand several times and then dismantled and now rebuilding making sure the markers are still in line. So if I have not fecked something up should be ok, still nervous though as I over think things far too much! Fingers crossed. |
12-05-20, 10:01 AM | #22 |
Grown up member
Classic Audi Club Member
Join Date: Jan 2013
Posts: 94
|
Only think I’m not sure about is how to get the bolt to 450nm without a torque wrench?
|
12-05-20, 10:03 AM | #23 |
4 ring whore!
Classic Audi Club Member
Join Date: Aug 2015
Location: Dalgety Bay, Fife
Posts: 2,078
|
A big bar, heaved as hard as you can in a manly way worked for me.
Unless you’ve got a torque wrench that’s for a lorry or 3/4 drive you’ll never get there |
12-05-20, 11:40 AM | #24 |
Senior Member
Classic Audi Club Member
Join Date: Feb 2019
Location: Near an MB ur Quattro
Posts: 1,171
|
My brother in law works for London Underground, and i used a torque wrench used on their trains....
The VAG tool uses a multiplier, so a "standard" torque wrench is used. ?tool 2079? ?2084? |
12-05-20, 12:22 PM | #25 |
Senior Member
Classic Audi Club Member
Join Date: Apr 2018
Location: Wales
Posts: 1,157
|
Agricultural engineer local to you? They have them
|
12-05-20, 04:15 PM | #26 |
Grown up member
Classic Audi Club Member
Join Date: Jun 2013
Location: Northern Ireland
Posts: 209
|
Alex, aka error404, makes a locking tool at 50 quid.
https://www.s2forum.com/forum/member...k-locking-tool |
12-05-20, 04:58 PM | #27 |
Grown up member
Classic Audi Club Member
Join Date: Jan 2013
Posts: 94
|
Made my own great job off and on again with no issue 50x50 box section with a notch cut in simple cheap and it works
|
Bookmarks |
|
|