4 x 108 to 5x 112

Gmac · 08-02-17, 10:12 AM

I've got the 80 b4 and was just curious as to when and what models started getting the 5 stud, and was it 5x112 straight off or was it 5x100 first? I know the a3/s3 8l was 5 x100.

Just curious really!

audi80fan · 08-02-17, 10:20 AM

Just the S2 and RS2 had the 5 studs I believe, yet the same setup is on even the basic early A4 B5s

vorsprung durch technik · 08-02-17, 10:25 AM

On the B4 only the S2 got the 5 x 112 pcd hubs and if your looking to do the conversion on your car you'll need for the front......... S2 carriers or V6 2.6/2.8 plus S2 5 x112 hubs. You could get the rear 5 x 112 pcd for your car of a B5 fwd car.

There are other options for the front like bits of C4 A6 5 stud but that gets a little bit more complicated.

Gmac · 08-02-17, 10:26 AM

So 80 coupe/cabs are 4x108 too?

vorsprung durch technik · 08-02-17, 10:27 AM

Quote:

Originally Posted by Gmac

So 80 coupe/cabs are 4x108 too?

Yes.

msh · 08-02-17, 10:40 AM

5x100 was VW thing, one more bolt added to the 4x100 setup to have more bolts to handle torque of VR6, and then it was adapted for mk4, and that's what's "Audi A3".

Gmac · 08-02-17, 01:41 PM

Good info! Cheers folks!

Hoyle · 08-02-17, 03:53 PM

Some typ43's are 5x112, just a fun fact

Audiden · 08-02-17, 04:32 PM

RS2's are the oddball with 4x130 Porsche fitment

quattrostyle · 12-02-17, 06:20 PM

Quote:

Originally Posted by Audiden

RS2's are the oddball with 4x130 Porsche fitment

5 x 130

08-02-17, 03:53 PM	#8
Hoyle 80q addict Classic Audi Club Member Join Date: Nov 2010 Location: North Wales Posts: 840	Some typ43's are 5x112, just a fun fact __________________ My 80 Quattro thread

08-02-17, 04:32 PM	#9
Audiden Senior Member Classic Audi Club Member Join Date: Aug 2008 Location: Scotland Posts: 1,257	RS2's are the oddball with 4x130 Porsche fitment __________________ Too many cars!!

08-02-17, 10:20 AM	#2
audi80fan Senior Member Classic Audi Club Member Join Date: Mar 2016 Posts: 1,157	Just the S2 and RS2 had the 5 studs I believe, yet the same setup is on even the basic early A4 B5s

08-02-17, 10:25 AM	#3
vorsprung durch technik 4 ring whore! Classic Audi Club Member Join Date: Feb 2014 Location: Near Watford. Posts: 7,753	On the B4 only the S2 got the 5 x 112 pcd hubs and if your looking to do the conversion on your car you'll need for the front......... S2 carriers or V6 2.6/2.8 plus S2 5 x112 hubs. You could get the rear 5 x 112 pcd for your car of a B5 fwd car. There are other options for the front like bits of C4 A6 5 stud but that gets a little bit more complicated.

08-02-17, 10:26 AM	#4
Gmac Grown up member Classic Audi Club Member Join Date: Feb 2015 Location: Aberdeenshire Posts: 686	So 80 coupe/cabs are 4x108 too?

08-02-17, 10:40 AM	#6
msh 4 ring whore! Join Date: Jun 2008 Location: Rucava, Latvija Posts: 3,816	5x100 was VW thing, one more bolt added to the 4x100 setup to have more bolts to handle torque of VR6, and then it was adapted for mk4, and that's what's "Audi A3".

08-02-17, 01:41 PM	#7
Gmac Grown up member Classic Audi Club Member Join Date: Feb 2015 Location: Aberdeenshire Posts: 686	Good info! Cheers folks!