Classic Audi Technical Mech/Tech Suspension & Brakes » Front/Rear Wishbones and Ball Joints

Thread Tools Display Modes
Old 10-12-17, 09:51 PM   #11
Grown up member
Classic Audi Club Member
Join Date: Dec 2010
Location: Bingley
Posts: 484

Originally Posted by Colin Aitchison View Post
I would have that carrier in my sand blasting cabinet, or you could get a bench grinder and replace one of the wheel with a wire wheel, after cleaning up etch primer and two coats of black paint, as for buying a new one
have you had a look at the part number 857505403B left 857505404B right, the part numbers start with 857 this is normally a Ur quattro part number, this means it was designed for the Ur quattro and may fit on other Audi's, in this case Audi 80, 90, coupe and Ur, did a search on yahoo, some in the states $159 + tax + delivery + import duty each, Audi tradition have no stock, you could call quattro corner but be sitting down when peter gives you a price,
whats you thoughts?
Agree with Colin on this one, its a non wearing part and NLA and although it may look very rusty it should clean up amost like new, availability was bad 25 years ago when I did my UR suspension I remember the Audi oe rear ball joints being in the region of 100 and no one made pattern ones back then.
quattrodave is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT. The time now is 02:16 PM.

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna