2019 Sorn work list

20vcqdriver · 24-10-19, 01:59 PM

Well its almost another season done and time to put the Cq onto SORN. Not done many miles this year due to crappy weather but still got a list of jobs to sort over the 4 months its away avoiding the salty roads..:
1) Replace front strut top mounts including adding some support rings that will extend their life.
2) Replace rear strut top mounts for heavy duty versions (last changed in 1997)!
3) Oil and filter change. (despite having only done 2600miles this year).
4) sort annoying clunk/rattle from front offside wheel/suspension area.. (Not figured out what could cause it yet)
5) Remove and service the turbo and add upgraded hot side to eliminate the surge (Also help get power over 450bhp and on tests only added 200rpm to spool point).
6) Up to AutoMark for re-map..
7) New slave cylinder
Shorter list than normal but enough to keep me busy

20vcqdriver · 27-10-19, 12:08 AM

New exhaust housing, up from surge producing 6cm2 to 10cm2
hope pic link works
Also upgrading the tracker I have fitted... Had this one for 5 years, recommend everyone with a classic gets one!

John. · 27-10-19, 07:26 AM

Quote:

Originally Posted by 20vcqdriver

New exhaust housing, up from surge producing 6cm2 to 10cm2

....who do you use when ordering turbo stuff?

20vcqdriver · 27-10-19, 09:54 AM

Quote:

Originally Posted by John.

....who do you use when ordering turbo stuff?

Was guided to this company from the S2 forum, have used 034EFi before now for some bits but this is a straight swap for my present K26 hotside
https://www.turbosystems.info/produc...ousing-upgrade
Refurb of turbo is getting done by the company who put together the MD357 turbo in the first place ( https://www.turbodynamics.co.uk/ )

slacky · 27-10-19, 04:01 PM

Boooost!

20vcqdriver · 06-11-19, 10:19 PM

Pic of the strut top mount strengthening rings that have been receiving praise on the S2 Forum and will be fitting in the next two weeks.
Also got another job now as noticed the clutch reservoir was all but empty so looks like a new slave cylinder as no evidence of fluid on the drivers side floor and noticed the clutch mechanism has got very squeaky, so could mean a gearbox out job to remove fluid from inside the bell housing and re-grease mechanism and fit a new clutch release bearing which takes a hammering from the uprated clutch

Minty · 08-11-19, 10:01 PM

Always enjoy reading Dave, keep the updates coming

20vcqdriver · 10-11-19, 08:56 PM

Started the work this weekend, replaced passenger side strut top mount for the new version with its support rings. Made a special tool for the top nut many years ago and is one of many home made specialist tools to make maintenance on the cq a much easier and stress free affair:

Pics below of the difference between the old and new, new gap is 10mm+ less than before:

20vcqdriver · 17-11-19, 04:27 PM

Well after 3 days on and off, managed to get turbo off ready for sending away for refurb and replacing the 6AR for the 10AR housing see below, Interested to see if it has the desired affect of eliminating surge..

20vcqdriver · 05-12-19, 06:48 PM

Turbo now returned with new roller bearing core,billet compressor wheel and my 10cm exhaust housing. Just waiting for a couple of new hoses before refitting it

27-10-19, 12:08 AM	#2
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	New exhaust housing, up from surge producing 6cm2 to 10cm2 hope pic link works Also upgrading the tracker I have fitted... Had this one for 5 years, recommend everyone with a classic gets one! __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:- Last edited by 20vcqdriver; 27-10-19 at 12:16 AM.

27-10-19, 04:01 PM	#5
slacky 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: wirral Posts: 4,452	Boooost! __________________ *90q-Cab.2.3E-Ur-S6-b2-80 Sport* Member 111

06-11-19, 10:19 PM	#6
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Pic of the strut top mount strengthening rings that have been receiving praise on the S2 Forum and will be fitting in the next two weeks. Also got another job now as noticed the clutch reservoir was all but empty so looks like a new slave cylinder as no evidence of fluid on the drivers side floor and noticed the clutch mechanism has got very squeaky, so could mean a gearbox out job to remove fluid from inside the bell housing and re-grease mechanism and fit a new clutch release bearing which takes a hammering from the uprated clutch __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-

08-11-19, 10:01 PM	#7
Minty Senior Member Classic Audi Club Member Join Date: Jul 2008 Location: Wirral Posts: 1,528	Always enjoy reading Dave, keep the updates coming __________________ 1984 GT5E Topaz Green 1982 GT5S Helios Blue - now in Ireland 1983 GT5E Topaz Green - donor 1986 GT 2.0 Tornado Red - long gone 2001 A6 2.4 V6 - exported to Ireland

10-11-19, 08:56 PM	#8
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Started the work this weekend, replaced passenger side strut top mount for the new version with its support rings. Made a special tool for the top nut many years ago and is one of many home made specialist tools to make maintenance on the cq a much easier and stress free affair: Pics below of the difference between the old and new, new gap is 10mm+ less than before: __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-

17-11-19, 04:27 PM	#9
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Well after 3 days on and off, managed to get turbo off ready for sending away for refurb and replacing the 6AR for the 10AR housing see below, Interested to see if it has the desired affect of eliminating surge.. __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-

05-12-19, 06:48 PM	#10
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Turbo now returned with new roller bearing core,billet compressor wheel and my 10cm exhaust housing. Just waiting for a couple of new hoses before refitting it __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-