Removal of 1995 80 cabriolet rear fender

nickwoodz · 27-01-14, 09:56 PM

Does anyone know how to remove a rear fender from a 1995 80 cabriolet? - I am trying to fit reversing sensors. Thanks for any help

Audiden · 27-01-14, 11:00 PM

Rear bumper you must mean... Probably 2 or 3 screws to come off either side in the arches & 2 nuts that support each bracket either side on the inside of the rear panel. Easy job.

Audicted · 28-01-14, 02:21 PM

Remove inner trunk liner. From inside trunk undo two 13mm bolts on right side, two 13mm biolts on left side PLUS one 13mm bolt about 20cm along the left frame rail. May have to remove screws that hold the wheel liners to the bumper

27-01-14, 11:00 PM	#2
Audiden Senior Member Classic Audi Club Member Join Date: Aug 2008 Location: Scotland Posts: 1,257	Rear bumper you must mean... Probably 2 or 3 screws to come off either side in the arches & 2 nuts that support each bracket either side on the inside of the rear panel. Easy job. __________________ Too many cars!!

28-01-14, 02:21 PM	#3
Audicted Grown up member Join Date: Oct 2011 Posts: 41	Remove inner trunk liner. From inside trunk undo two 13mm bolts on right side, two 13mm biolts on left side PLUS one 13mm bolt about 20cm along the left frame rail. May have to remove screws that hold the wheel liners to the bumper