Classic Audi Technical Mech/Tech Wheels & Tyres » How to adjust camber on UR

Thread Tools Display Modes
Old 06-08-17, 03:00 PM   #1
Join Date: Aug 2017
Posts: 11
Default How to adjust camber on UR

Hi after kerbing my rear wheel I cannot get the camber to line up verticaly can anyone advise
jossdawn is offline   Reply With Quote
Old 06-08-17, 03:12 PM   #2
Grown up member
Classic Audi Club Member
Join Date: Dec 2010
Location: Bingley
Posts: 468

Its possible to adjust camber by moving the ball joint relative to the wishbone ( 2 bolts to loosen you can then slide the balljoint towards or away from the wishbone), you will also need to adjust the rear track if you adjust the camber as it will alter the relative alighment.

You must have bent something if its changed so B4 adjusting anything you need to check for subframe/wishbone/lower strut damage.

Last edited by quattrodave; 06-08-17 at 03:17 PM.
quattrodave is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT. The time now is 02:55 AM.

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna