Ronal R8 Variations

ZermattGT · 14-07-09, 10:25 PM

As near as I can tell R8's were produced in the following sizes.

5.5x13et38/4x100 PCD
6x13 ? /4x100
6x14et45/4x100 for type 81 Coupe, and front drive saloons
6x14et45/4x108 for type 81 Quattros and type 85 Coupe and Quattros
6x14et ? ? 5x112 ?
6x14et35/4x100 (dished)
6x15et35/4x100
6x15et42/4x100
6x15et45/4x108
6x15et45/5x112 for the early UrQ and 5T
7x15et22/5x112 (dished)
7x15et25/4x100 (dished)
7x15et28/4x100&108 (deep dished)
7x15et35/4x100&108/5x112 (dished)
7x15et37/4x100&108 (dished)
7x15et42/4x100&108/5x112 (dished)
8x15et24/4x108/5x112 (dished) for the Ur Quattro after 1983?
9x15et12/5x112 (dished) Sport Quattro
10x15et/5x112 (dished)
Please add/amend this list if you can.

It would be great to have a catalog image from the time.

Coxy · 14-07-09, 10:31 PM

Got an Audi Sport accessories brochure circa 1985 here which shows the R8's as available in 14's for the 80 and 15's for the 90, 100 and 200.
What was the difference between the R8 and the Comp T/A's as the brochure has both names under the image?

**edit : read the brochure now and that's the wheel and tyre combo.

ZermattGT · 14-07-09, 10:35 PM

Any chance you can scan the pages.
This thread could be a quick resource for many folks questions.

Coxy · 14-07-09, 10:43 PM

I though I had it scanned in but only the part with the Centra wheels and Votex spolier.
I'll get it sorted tomorrow

Cornholio · 14-07-09, 10:46 PM

http://www.kvquattro.com/1986AudiSportsAccessories.html

http://www.kvquattro.com/1986AudiAcc...ccesories.html

http://www.kvquattro.com/1988AudiAcc...chureJuly.html

http://www.kvquattro.com/1990accessoryBrochure.html

Also, there were 2 different versions of the 4 stud R8, similar but slightly different.....

Coxy · 14-07-09, 10:49 PM

cheers, that save me scanning it in as that's the same brochure!

amanda · 15-07-09, 08:51 AM

Hmmm see the centra ones

...................I have a set in 5 stud white complete with the center flat cap

urCquattro · 26-05-10, 10:07 AM

Quote:

Originally Posted by ZermattGT

As near as I can tell R8's were produced in the following sizes.

5.5x13et38/4x100PCD
6x14et45/4x100&108 PCD
6x14et35/4x100 (dished)
6x15et35/4x100
6x15et42/4x100
6x15et45/4x108
7x15et22/5x112 (dished)
7x15et25/4x100 (dished)
7x15et28/4x100 (deep dished)
7x15et35/4x100&108/5x112 (dished)
7x15et37/4x100&108 (dished)
7x15et42/4x100&108/5x112 (dished)
8x15et24/4x108/5x112 (dished)
9x15et11/4x108 (dished)
Please add/amend this list if you can.

It would be great to have a catalog image from the time.

They also was made in 6x13 4/100

20vcqdriver · 26-05-10, 11:43 AM

Wish they'd done some 16" too. 15" a bit limiting when you need bigger brakes

The 15" ET42 4 studs are the ones to have in order to get 205's on without arch mods to a Cq

urCquattro · 26-05-10, 05:20 PM

Quote:

Originally Posted by 20vcqdriver

Wish they'd done some 16" too. 15" a bit limiting when you need bigger brakes

The 15" ET42 4 studs are the ones to have in order to get 205's on without arch mods to a Cq

yes agree i have a lot of them (14

) 15x7 ET42 4/108 , but no car to put it on

this maybe could be a alternativ
availble in 15", 16", 17", 18", 19", 20"

15-07-09, 08:51 AM	#7
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Hmmm see the centra ones ...................I have a set in 5 stud white complete with the center flat cap __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

26-05-10, 11:43 AM	#9
20vcqdriver 4 ring whore! Classic Audi Club Member Join Date: Dec 2007 Location: Wirral Posts: 3,910	Wish they'd done some 16" too. 15" a bit limiting when you need bigger brakes The 15" ET42 4 studs are the ones to have in order to get 205's on without arch mods to a Cq __________________ Coupe quattro 1986:-~450bhp + loooong list of mods! Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque! Audi S4 4.2 V8 cabriolet 2004:-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ronal R8 14x6 x4	mikes2	Parts For Sale	3	10-02-10 08:50 PM
Which Ronal R8 do you think....	ZermattGT	Wheels & Tyres	17	28-08-09 11:34 AM
Ronal R8s	ChrisG	Parts Wanted	2	20-12-08 08:56 PM
ronal r8	crisarc	Parts Wanted	5	02-09-08 09:17 PM
Ronal LS	Rico	Parts For Sale	5	02-05-08 09:04 AM

14-07-09, 10:31 PM	#2
Coxy 4 Ring Mafia Classic Audi Club Member Join Date: Jul 2007 Location: on the side of a hill in Shropshire! Posts: 28,215	Got an Audi Sport accessories brochure circa 1985 here which shows the R8's as available in 14's for the 80 and 15's for the 90, 100 and 200. What was the difference between the R8 and the Comp T/A's as the brochure has both names under the image? **edit : read the brochure now and that's the wheel and tyre combo.

14-07-09, 10:35 PM	#3
ZermattGT Quad Lamp Commando Classic Audi Club Member Join Date: Nov 2008 Location: Massachusetts, U.S.A. Posts: 4,299	Any chance you can scan the pages. This thread could be a quick resource for many folks questions.

14-07-09, 10:43 PM	#4
Coxy 4 Ring Mafia Classic Audi Club Member Join Date: Jul 2007 Location: on the side of a hill in Shropshire! Posts: 28,215	I though I had it scanned in but only the part with the Centra wheels and Votex spolier. I'll get it sorted tomorrow

14-07-09, 10:46 PM	#5
Cornholio Grown up member Join Date: Jul 2007 Posts: 555	http://www.kvquattro.com/1986AudiSportsAccessories.html http://www.kvquattro.com/1986AudiAcc...ccesories.html http://www.kvquattro.com/1988AudiAcc...chureJuly.html http://www.kvquattro.com/1990accessoryBrochure.html Also, there were 2 different versions of the 4 stud R8, similar but slightly different.....

14-07-09, 10:49 PM	#6
Coxy 4 Ring Mafia Classic Audi Club Member Join Date: Jul 2007 Location: on the side of a hill in Shropshire! Posts: 28,215	cheers, that save me scanning it in as that's the same brochure!