Classic Audi Technical Mech/Tech Suspension & Brakes » Brake power regulator

Thread Tools Display Modes
Old 28-11-21, 03:26 PM   #1
Grown up member
Join Date: Nov 2020
Posts: 98
Default Brake power regulator

Afternoon all

Quick question, does this look about the right amount of movement in the brake power regulator? The Haynes manual says the lever should move when the brake pedal is depressed and released with the weight of the car on the ground, but it doesn't say by how much. In the video below I was standing on the brake pretty hard, and it was moving, but not very much. I'm guessing the internals don't need much movement to allow more/less brake fluid through and therefore regulate the pressure, but thought it would be good to see if it looks normal with those who have more experience!

I appreciate it can't be fully tested without high pressure gauges.

84CoupeGT is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT. The time now is 06:24 PM.

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna