Home | Register | FAQ | Members List | Calendar | Today's Posts | Search |
Social Groups |
Registered
Members: 13,705 | Total Threads: 40,056 | Total Posts: 470,826 Currently Active Users: 721 (19 members and 702 guests) Welcome to our newest member, ozakepo |
|
|
Thread Tools | Display Modes |
24-12-17, 11:20 PM | #1 | |
Senior Member
Classic Audi Club Member
Join Date: Dec 2013
Location: Back home in Tillicoultry
Posts: 1,308
|
Audi 80/90/100/200 Block and Pistons Brand New
Brand new block and pistons, bore 81mm five cylinder, pistons marked " 2.2US " I do not know the engine number but the chamber in the piston crown is the same shape as the KV piston but the chamber is twice as deep ( lower compression ratio than KV), when I got the block is was all greased up but in polythene and that is why the white grease has the funny marks on it, I have had No.1 piston out for a look and all looks good, there is some slight rusting on the top of the bores but above where the top piston ring will stop, I could got the full hog and get it bored and fit KV pistons but at this time I thing it just needs moved on,
price, I dont have a clue, I have had a look on Audi Tradition don't look there it is nuts ( have purchased a Ur quattro for less), sensible offers please. |
|
24-12-17, 11:41 PM | #2 |
Grown up member
Classic Audi Club Member
Join Date: Dec 2010
Location: Bingley
Posts: 634
|
Colin, is it possibly an MB or other 10v turbo block as pistons would have lower compression than KV ?
|
25-12-17, 12:54 AM | #3 |
Senior Member
Classic Audi Club Member
Join Date: Dec 2013
Location: Back home in Tillicoultry
Posts: 1,308
|
You are correct about the MB being lower compression but it is not an MB block and not MB pistons and not a turbo block because no oil squiters.
|
26-12-17, 12:54 PM | #4 |
Senior Member
Classic Audi Club Member
Join Date: Dec 2013
Location: Back home in Tillicoultry
Posts: 1,308
|
bump
|
30-12-17, 02:01 AM | #5 |
Senior Member
Classic Audi Club Member
Join Date: Dec 2013
Location: Back home in Tillicoultry
Posts: 1,308
|
Very sad to see little or no interest in this block and pistons, Looking for £400 for the block and piston.
|
09-01-18, 10:47 AM | #6 |
Senior Member
Classic Audi Club Member
Join Date: Dec 2013
Location: Back home in Tillicoultry
Posts: 1,308
|
bump
|
Bookmarks |
|
|