Does anywhere,make q90 B2 type 85 sills? - Page 3

BIGGYIN · 18-04-12, 11:13 AM

Thanks.

I',ve seen them,before.

SteveT63 · 18-04-12, 11:23 AM

Karl what is it that you want mate? Standard sills or UR ones? If its standard I might be able to help with a pair of perfect ones from the 2 door. I need to check to make sure they've come off in one piece ok, but I'm almost certain they have. Will get back to you later in the week.

BIGGYIN · 18-04-12, 06:28 PM

Preferably,straight swop for mine(standard).

Steve,I'd be interested in yours.

Would they be long enough,for a 4 door?
Thanks.

Andy10v · 18-04-12, 08:25 PM

Could you not make some up if you could access a big brake?

BIGGYIN · 22-04-12, 07:01 PM

Just,looking at my options?

Laaf · 14-09-13, 07:55 PM

Lifting this thread as I'd like to know if the sills are somewhere in the world available. My drivers side has rusted some where the jacking point is and would need attending.

BIGGYIN · 16-02-14, 08:26 PM

Call me thick(Don't

),but whats behind a sill(B2)?Does it have,an inner sill?
Haven't cut mine out yet,so haven't a clue?

If anybody has pics,that would be very helpful.

Val · 16-02-14, 08:50 PM

http://www.s2forum.com/forum/showthread.php?p=771016
Or another source.
Inside, there is some reinforcement.
Basically you need to bore out every point weld. Plus some places with a angle grinder.

BIGGYIN · 16-02-14, 09:13 PM

Saw that thread,but couldn't really get the answers I wanted(Sorry).

His friend did the work on his car and he didn't know of the details.
I was thinking it may have inner cross section surports,but wasn't too sure?

Val · 16-02-14, 09:28 PM

Didn't have them when i bought these from different manufacturer. Even didn't expect... etka don't list these. Maybe one complete part but anyway NLA.

18-04-12, 11:13 AM	#21
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	Worth considering. Thanks.I',ve seen them,before. __________________ q90 B2 Type 85 - q90 B2 Type 85-PROJECT-ABY 20vt KARL. Injection is nice but I'd rather be blown

18-04-12, 11:23 AM	#22
SteveT63 Senior Member Classic Audi Club Member Join Date: Sep 2008 Posts: 3,045	Karl what is it that you want mate? Standard sills or UR ones? If its standard I might be able to help with a pair of perfect ones from the 2 door. I need to check to make sure they've come off in one piece ok, but I'm almost certain they have. Will get back to you later in the week. __________________ Peace...........through superior acceleration! T85 1985 90quattro I5 20vT T81 1983 80 Sport Red T81 1983 80 Sport Silver

18-04-12, 06:28 PM	#23
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	Preferably,straight swop for mine(standard). Steve,I'd be interested in yours.Would they be long enough,for a 4 door? Thanks. __________________ q90 B2 Type 85 - q90 B2 Type 85-PROJECT-ABY 20vt KARL. Injection is nice but I'd rather be blown

18-04-12, 08:25 PM	#24
Andy10v Grown up member Classic Audi Club Member Join Date: Dec 2008 Location: Stirling Posts: 861	Could you not make some up if you could access a big brake? __________________ 2005 350z GT Sold-1992 3B S2 coupe-RS2+, 996s, konis, forged rods, rear torsen.... Sold-1993 ABY coupe

22-04-12, 07:01 PM	#25
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	Just,looking at my options? __________________ q90 B2 Type 85 - q90 B2 Type 85-PROJECT-ABY 20vt KARL. Injection is nice but I'd rather be blown

14-09-13, 07:55 PM	#26
Laaf Grown up member Join Date: Jan 2013 Location: Finland Posts: 29	Lifting this thread as I'd like to know if the sills are somewhere in the world available. My drivers side has rusted some where the jacking point is and would need attending.

16-02-14, 08:26 PM	#27
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	Call me thick(Don't ),but whats behind a sill(B2)?Does it have,an inner sill? Haven't cut mine out yet,so haven't a clue? If anybody has pics,that would be very helpful. __________________ q90 B2 Type 85 - q90 B2 Type 85-PROJECT-ABY 20vt KARL. Injection is nice but I'd rather be blown

16-02-14, 08:50 PM	#28
Val Grown up member Join Date: Dec 2012 Location: 5vtq gte Posts: 177	http://www.s2forum.com/forum/showthread.php?p=771016 Or another source. Inside, there is some reinforcement. Basically you need to bore out every point weld. Plus some places with a angle grinder.

16-02-14, 09:13 PM	#29
BIGGYIN 4 ring whore! Classic Audi Club Member Join Date: Mar 2009 Location: Merseyside Posts: 7,976	Thanks Saw that thread,but couldn't really get the answers I wanted(Sorry). His friend did the work on his car and he didn't know of the details. I was thinking it may have inner cross section surports,but wasn't too sure? __________________ q90 B2 Type 85 - q90 B2 Type 85-PROJECT-ABY 20vt KARL. Injection is nice but I'd rather be blown

16-02-14, 09:28 PM	#30
Val Grown up member Join Date: Dec 2012 Location: 5vtq gte Posts: 177	Didn't have them when i bought these from different manufacturer. Even didn't expect... etka don't list these. Maybe one complete part but anyway NLA.