Home | Register | FAQ | Members List | Calendar | Today's Posts | Search |
Social Groups |
Registered
Members: 13,593 | Total Threads: 40,056 | Total Posts: 470,826 Currently Active Users: 838 (18 members and 820 guests) Welcome to our newest member, ugakubuq |
|
|
Thread Tools | Display Modes |
20-07-19, 04:09 PM | #1 | |
Grown up member
Classic Audi Club Member
Join Date: Dec 2008
Posts: 122
|
B2 80/90/coupe front wing
Wanted drivers side (RHD) front wing for B2 80/90/coupe.
Any condition, the worse the better for most of the wing. The only part I need to be in good condition is the top section that bolts down onto the inner wing (basically all of the part of the front wing which is under the bonnet. The rest of the wing could be cut off to save on postage as I don;t need it. I have rust on the top inner wing of my '85 Urq which has spread to the bolt-down top of the outer wing. I intend to cut that section out of my Urq wing and weld in a good section from an otherwise poor wing. |
|
22-07-19, 09:34 AM | #2 |
Super Moderator
Classic Audi Club Member
Join Date: Jul 2007
Location: Sissix-by-the-sea
Posts: 15,218
|
__________________
1985 WR quattro, 1985 20vT RallyRep, 1993 MTM ABY S2 Avant. 2010 S3 Sportback. |
24-07-19, 08:40 PM | #3 |
Grown up member
Classic Audi Club Member
Join Date: Mar 2013
Posts: 251
|
be carefull not too warp the ur wing welst welding the replacement wing rail . take your time and damp down each weld ect
|
Bookmarks |
|
|