90 Quattro 20V Sport Parts

Thompy · 26-01-15, 11:33 PM

Right, it's time to resurrect the 90. She's been in storage for almost 3 years and I now have some funds available to make a start. Plan is to get it sorted mechanically and MOT'd then drive it over the summer to pinpoint any other issues before going ahead with the cosmetic overhaul over the winter. The main thin I need is an exhaust system, I've been looking online and there doesn't seem to be any off the shelf systems available so that just leaves getting one made. Before I go down this route I thought I'd ask on here first for either pointers to somewhere online or someone who has a second hand stainless system lying about. One potential problem is that I'm over in Northern Ireland, so postage may be tricky, but I'm willing to pay so long as it doesn't push the price towards the cost of a new fabricated system.
Also a 5 branch manifold and heatshield would be nice, but not essential. And for the forthcoming cosmetic overhaul the bottom door mouldings are shot. I've seen these for sale on a US website, but the total was coming in around $500 - bit steep. so again any pointers or anyone have a good set they'd be willing to sell.

Thanks,

Andrew

mikes2 · 27-01-15, 07:54 AM

bottom door mouldings were still available from the dealers fairly recently.

For the exhaust, I got a genuine system for less than the cost of a stainless one. It's still going strong 7 years later

Flying Frank · 27-01-15, 08:52 AM

Not sure if the mouldings are the same but have N/S door and front wing mouldings still in dealers wraps from my Coupe (1991) . Can give you part numbers if you want to check ? cheers, Frank.

spink · 27-01-15, 12:49 PM

if its a sport I am thinking its the thin ones in the middle he wants,the ones on the doors and maybe the front wings and same as an RS2 so are very sought after

mikes2 · 27-01-15, 01:03 PM

definitely says bottom door mouldings in his post

The narrow sport trims can be re-used. I had to do that when I got my car resprayed. VW Heritage listed 6 out of the 8 trims as available about 3 years ago but the price was eye watering.

spink · 27-01-15, 01:05 PM

Ah yeah lol

27-01-15, 07:54 AM	#2
mikes2 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Polmont Posts: 2,617	bottom door mouldings were still available from the dealers fairly recently. For the exhaust, I got a genuine system for less than the cost of a stainless one. It's still going strong 7 years later __________________ 1991 90 quattro 20v sport 1991 90 quattro

27-01-15, 01:03 PM	#5
mikes2 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Polmont Posts: 2,617	definitely says bottom door mouldings in his post The narrow sport trims can be re-used. I had to do that when I got my car resprayed. VW Heritage listed 6 out of the 8 trims as available about 3 years ago but the price was eye watering. __________________ 1991 90 quattro 20v sport 1991 90 quattro

27-01-15, 08:52 AM	#3
Flying Frank 4 ring whore! Classic Audi Club Member Join Date: Dec 2012 Location: Kernow, Gods own county !! Posts: 2,388	Not sure if the mouldings are the same but have N/S door and front wing mouldings still in dealers wraps from my Coupe (1991) . Can give you part numbers if you want to check ? cheers, Frank.

27-01-15, 12:49 PM	#4
spink Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: yorkshire Posts: 1,525	if its a sport I am thinking its the thin ones in the middle he wants,the ones on the doors and maybe the front wings and same as an RS2 so are very sought after

27-01-15, 01:05 PM	#6
spink Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: yorkshire Posts: 1,525	Ah yeah lol