Classic Audi » Technical » Mech/Tech » Electrical problems » OBD blink codes on an Audi 80 B4 2.0E

Reply
 
Thread Tools Display Modes
Old 23-02-19, 03:28 PM   #11
mikes2
4 ring whore!
Classic Audi Club Member
 
Join Date: Nov 2007
Location: Polmont
Posts: 2,617
Default

Post them up here and we'll attempt to assist
__________________
1991 90 quattro 20v sport
1991 90 quattro
mikes2 is offline   Reply With Quote
Old 24-02-19, 08:11 AM   #12
RichardV
Newbie!
 
RichardV's Avatar
 
Join Date: Mar 2018
Location: Gloucestershire UK.
Posts: 11
Default

Here is the report that was initially generated, but when I cleared these the faults they have not come back so I am assuming they are historical issues.

The problem that I am trying to fix is difficult starting on cold days, so I'll see what is reported after I have had a chance to try that.

Address 01: Engine Labels: Redir Fail!
Part No: 039 906 022
Component: DIGIFANT 1.6 1243PMC 11
VCID: 4FFB71E78EC1321F577-0962
5 Faults Found:
00523 - Intake Air Temp Sensor (G42) 30-00 - Open or Short to Plus
00522 - Engine Coolant Temperature Sensor (G62) 34-10 - No Elaboration Available - Intermittent
00552 - Potentiometer for Air Flow Meter (G19) 31-00 - Open or Short to Ground
00525 - Oxygen (Lambda) Sensor (G39) 03-00 - No Signal
00524 - Knock Sensor 1 (G61) 03-00 - No Signal
Readiness: N/A
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: None
Part No: 097 927 731 CH
Component: AG4 Getriebe 097 1326
Coding: 00000
Shop #: WSC 00000
VCID: 6889BA7B0B6FC52736D-0964
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 4A0-907-379.lbl
Part No: 4A0 907 379 A
Component: Bremsen-Elektronik
Shop #: BB 33837
VCID: 290FFF7FD0E53C2FE93-4B3C
No fault code found.
End----(Elapsed Time: 01:29, VBatt start/end: 12.4V/12.4V. VIgn 0.0V)------
RichardV is offline   Reply With Quote
Old 24-02-19, 12:30 PM   #13
mikes2
4 ring whore!
Classic Audi Club Member
 
Join Date: Nov 2007
Location: Polmont
Posts: 2,617
Default

That's normal procedure.

Clear the codes and go for a drive. Re check the codes.

There's usually a date stamp on the code which tells you when it was generated
__________________
1991 90 quattro 20v sport
1991 90 quattro
mikes2 is offline   Reply With Quote
Old 12-05-20, 07:23 PM   #14
RichardV
Newbie!
 
RichardV's Avatar
 
Join Date: Mar 2018
Location: Gloucestershire UK.
Posts: 11
Default Digifant Control Module Maps

I have a 1993 Audi 80 2.0E with and ABK engine and a Digifant II ECU which is failing to accelerate or rev above about 3000RPM.

I have a Ross Tech VCDS OBD reader and the engine is not showing any error codes at all despite clearly having problems.

Does anyone have a map for the control modules so that I can try to identify which sensor is which in the reports and see if any of them are the cause of my problems?

Thanks in advance.

RichardV
RichardV is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:14 AM.

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna