Sill trim re-fitting: '87 Coupe

BigT80 · 26-04-08, 01:04 PM

Hello, Still got to put up a pic of my 80 Sport, but currently rebuilding 87 Coupe q. Got top trim above plastic sill covers off OK, but re-fitting proving difficult; especially since some of the clips are not that good. Is it just a case of thumping them back in (works sometimes) or is there a knack? Any advice appeciated. Cheers.

Rob · 27-04-08, 05:01 PM

put moulding on at top 1st ,then 'thump' bottom in,you need to keep it even,i.e all top in then all the bottom.Hope this helps.

Rob

BigT80 · 28-04-08, 09:36 AM

Thanks Rob, I think that could be problem, that it is not lined up - that coupled with some rusty clips, but I've managed to source a few better ones, so we'll have another go. Cheers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE Audi Coupe Sill Covers	MikeNZ	Parts For Sale	6	16-07-09 08:50 PM
Help with fitting Coupe Quattro door trims	audi_kid	Bodywork, glass & exterior fitments	2	24-12-08 12:49 AM
Red plasmatic 'Coupe' trim	Isimmo	Parts Wanted	9	21-07-08 08:49 PM
Coupe Plasmatic Bootlid Trim	Isimmo	Car detailing & polishing	3	21-03-08 09:10 PM

27-04-08, 05:01 PM	#2
Rob Grown up member Classic Audi Club Member Join Date: Oct 2007 Posts: 42	put moulding on at top 1st ,then 'thump' bottom in,you need to keep it even,i.e all top in then all the bottom.Hope this helps. Rob

28-04-08, 09:36 AM	#3
BigT80 Grown up member Classic Audi Club Member Join Date: Apr 2008 Posts: 495	Thanks Rob, I think that could be problem, that it is not lined up - that coupled with some rusty clips, but I've managed to source a few better ones, so we'll have another go. Cheers.