Bonnet pull for Coupe!

86audicoupe · 21-08-09, 08:33 PM

Hi peeps!

This broke tonight...I'm not very amused! Does anyone have one available for purchase?!

amanda · 21-08-09, 08:39 PM

dealer or pete reeves does them at about £21ish IIRC

4v6 · 21-08-09, 09:02 PM

Yep still very much available as i bought one from Audi just a couple of weeks back....wasnt much either about 19 quid iirc.

Baggee · 21-08-09, 10:51 PM

Blimey a part that is currently NOT NLA. You coming to ADI Will?

86audicoupe · 22-08-09, 10:07 AM

Thanks! Will get one from Audi then, glad we can rely on them for the most important of parts!

86audicoupe · 22-08-09, 10:11 AM

Quote:

Originally Posted by Baggee

Blimey a part that is currently NOT NLA. You coming to ADI Will?

Yes, should be coming Chris. Not sure whether I'll be in mine or something else I buy before then! Mine needs to come off the road ideally to get some bits of bodywork done and the exhaust still needs attention (being an automatic I can't get a front pipe) so has to go into an exhaust specialist! How's your Coupe going?

Baggee · 22-08-09, 10:37 AM

Quote:

Originally Posted by 86audicoupe

Yes, should be coming Chris. Not sure whether I'll be in mine or something else I buy before then! Mine needs to come off the road ideally to get some bits of bodywork done and the exhaust still needs attention (being an automatic I can't get a front pipe) so has to go into an exhaust specialist! How's your Coupe going?

Coupe's fine Will. Got to get the idle stablisation valve replaced and the metering head cleaned and set up. Ben is doing that for me. Will be coming off the road after ADI and sort out wheel bearing and a few other jobs to. Keeps me outta trouble tho and a lot poorer lol

86audicoupe · 22-08-09, 11:03 AM

Would be good to have a chat and see the car again! I think I may have the same problem as you - idle stablisation valve. The idle seems to be very lumpy from cold then gets a lot better when warmed up but the idle is still a bit low. Starts off at 500rpm from cold and goes up to about 700rpm when warm. Any ideas?

gabriel.oconnell · 22-08-09, 02:17 PM

hi if you are stuck i have a bonnet pull and brackets and cable from an ur quattro for sale if you interested as all my parts will be for sale this week on ebay so say before thay are put on there

Baggee · 22-08-09, 07:56 PM

Quote:

Originally Posted by 86audicoupe

Would be good to have a chat and see the car again! I think I may have the same problem as you - idle stablisation valve. The idle seems to be very lumpy from cold then gets a lot better when warmed up but the idle is still a bit low. Starts off at 500rpm from cold and goes up to about 700rpm when warm. Any ideas?

Ben unplugged the ISV when the engine was ticking over. The revs went up. This proved it was the ISV. Have left it in Ben's capable hands to get me one. Out of interest I phoned Audi today. The guy said 'a what? Never heard of one of those. Does it fit onto the engine?'' I gave up after 10 mins

21-08-09, 08:39 PM	#2
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	dealer or pete reeves does them at about £21ish IIRC __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1987 80 cl in u pull it inverkeithing	Andy10v	Parts For Sale	4	17-12-09 10:13 AM
Bonnet Chrome Trim & Bumper rubber Wanted - 100 Coupe	MartyP	Parts Wanted	2	18-05-09 01:11 PM
Wanted bonnet cable and attachments for 1987 style coupe	mjl16v	Parts Wanted	5	03-01-09 02:42 PM
Under bonnet pics of Coupe quattro	Isimmo	Technical Info	20	24-09-08 07:50 AM

21-08-09, 09:02 PM	#3
4v6 Ex Member Classic Audi Club Member Join Date: Dec 2007 Posts: 5,565	Yep still very much available as i bought one from Audi just a couple of weeks back....wasnt much either about 19 quid iirc.

21-08-09, 10:51 PM	#4
Baggee 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: Aldridge, Walsall Posts: 2,257	Blimey a part that is currently NOT NLA. You coming to ADI Will?

22-08-09, 10:07 AM	#5
86audicoupe Classic Audi Pervert! Classic Audi Club Member Join Date: Dec 2007 Location: Dorset Posts: 2,182	Thanks! Will get one from Audi then, glad we can rely on them for the most important of parts!

22-08-09, 11:03 AM	#8
86audicoupe Classic Audi Pervert! Classic Audi Club Member Join Date: Dec 2007 Location: Dorset Posts: 2,182	Would be good to have a chat and see the car again! I think I may have the same problem as you - idle stablisation valve. The idle seems to be very lumpy from cold then gets a lot better when warmed up but the idle is still a bit low. Starts off at 500rpm from cold and goes up to about 700rpm when warm. Any ideas?

22-08-09, 02:17 PM	#9
gabriel.oconnell 4 ring whore! Classic Audi Club Member Join Date: Jun 2008 Location: brynmawr Posts: 3,243	hi if you are stuck i have a bonnet pull and brackets and cable from an ur quattro for sale if you interested as all my parts will be for sale this week on ebay so say before thay are put on there