To borrow: B2 cq exhaust manifold

[andya]

I promise to give it back

Since the engines coming out I figure it's a good time to replace the old exhaust manifold with a new stainless steel version and I need a template to work off. I'll double check, but I think I need the 5 into 3 manifold. The GT is 5 into 2 I think, so no good.

I will happily cover the postage and if your not too away I could come and pick it up.

[4v6]

Cant help with the manifold sir, but heres an interesting article on exhaust design that might help in your application.

https://www.enginelabs.com/engine-te...gn-and-theory/

[Isimmo]

I’ve got a Ur 10v manifold with a couple of small cracks, that’ll not help you. But teamed with the MB head, WR block and k24 turbo also here, I could sell you the lot cheap and watch your financial ruin from afar….

[SwallownAmazon]

This crowd might be able to help:
https://www.infinity-exhausts.co.uk/index

Not too far from you to perhaps drop in for a chat?

[andya]

Originally Posted by 4v6

Cant help with the manifold sir, but heres an interesting article on exhaust design that might help in your application.

https://www.enginelabs.com/engine-te...gn-and-theory/

Thanks for that, I'll have a read of that.

Originally Posted by Isimmo

I’ve got a Ur 10v manifold with a couple of small cracks, that’ll not help you. But teamed with the MB head, WR block and k24 turbo also here, I could sell you the lot cheap and watch your financial ruin from afar….

I'll politely decline that one

Originally Posted by SwallownAmazon

This crowd might be able to help:
https://www.infinity-exhausts.co.uk/index

Not too far from you to perhaps drop in for a chat?

Thanks, I'll also look at that. Many thanks

[quattrob81]

I should have one if still needed