Wazzing into a force 9 gale!!!

wildoliver · 07-06-10, 08:54 PM

Hi Brian I had those bits off you this week for the T85.

It looks pretty simple to make to be honest, it appears with a pipe bending machine and some at a guess 1" by 0.5" steel square tube and a bit of welding such a piece could be made.

If you get stuck and can either make a prototype roughly or get engineering drawings or one to copy then I'll be happy to help making some up and outsourcing any jobs that are beyond me, I have some good contacts with local engineering companies.

Steve · 07-06-10, 09:08 PM

I could probably do with one of those as well.

Tonks4x4 · 07-06-10, 09:11 PM

Don't worry Steve. All the bits I have found so far have been reproduced to a very high standard.

So when it's time to do my next one, all the parts will be on the shelf

Puglife · 07-06-10, 10:39 PM

Its aluminium, I dont have one but I may be able to access measurements to reproduce one. Brian I'll send a few emails and get back to you.

07-06-10, 10:39 PM	#4
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	Its aluminium, I dont have one but I may be able to access measurements to reproduce one. Brian I'll send a few emails and get back to you. __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

07-06-10, 09:08 PM	#2
Steve Grown up member Join Date: Nov 2007 Posts: 355	I could probably do with one of those as well.

07-06-10, 09:11 PM	#3
Tonks4x4 4 ring whore! Classic Audi Club Member Join Date: Oct 2008 Location: Huthwaite, Nottinghamshire Posts: 2,607	Don't worry Steve. All the bits I have found so far have been reproduced to a very high standard. So when it's time to do my next one, all the parts will be on the shelf