Which Ronal R8 do you think....

[ZermattGT]

Which Ronal R8 size do you guys feel would be the most versital size to remanufacture in all three VAG PCD's ( 4x100/4x108/5x112)?

I think for the greatest range of models, spacers added to those that really wish to push the look to 8", that 7x15 et 42 on all 3 bolt patterns would be the one.

As near as I can tell R8's were produced in the following sizes.


5.5x13et38/4x100PCD
6x14et45/4x100&108 PCD
6x14et35/4x100 (dished)
6x15et35/4x100
6x15et42/4x100
6x15et45/4x108
7x15et22/5x112 (dished)
7x15et28/4x100 (deep dished)
7x15et35/4x100&108/5x112 (dished)
7x15et37/4x100 (dished)
7x15et42/4x100&108/5x112 (dished)
8x15et24/4x108/5x112 (dished)
9x15et11/4x108 (dished)





While I'm understandingly partial to the extra deep dish of the 7x15 et 28's on my car, the offset is at the limit without flaring the fenders.




Thoughts?