Audi 80 b2 suspension

Audi Derek · 24-06-10, 08:01 PM

[quote=jogi730;141577]I'm running coilovers on my 90. My set up is as follows:

4 x Bilstein B6
4 x 2.5" race springs
4 x conversion tubes

I am happy with the ride height and have received positive comments it looks about right, but I am running 17" rims. HTH
Cheers
Chris

Why have you put the spring helper between the spring base plate and the locking nut ?? it an't going to do anything there (should be sat at the bottom of the spring) and it looks like that the spring base plate is on upside down,there is a lip on the top of it so that the spring can sit on it and not rub the threads away..

..

24-06-10, 08:01 PM	#5
Audi Derek “Been raced and rallied” Classic Audi Club Member Join Date: May 2008 Location: Bridgwater Somerset Posts: 1,431	[quote=jogi730;141577]I'm running coilovers on my 90. My set up is as follows: 4 x Bilstein B6 4 x 2.5" race springs 4 x conversion tubes I am happy with the ride height and have received positive comments it looks about right, but I am running 17" rims. HTH Cheers Chris Why have you put the spring helper between the spring base plate and the locking nut ?? it an't going to do anything there (should be sat at the bottom of the spring) and it looks like that the spring base plate is on upside down,there is a lip on the top of it so that the spring can sit on it and not rub the threads away.. .. __________________ Vorspurng durch Technik (see it does work)