1982 (type 81) audi 80 rear beam/axle

sprig · 29-10-08, 08:41 AM

Hello I'm after a rear beam/axle for my 1981 audi 80 gl.

I can collect anytime & bring tools to remove it myself If needed. If anyone knows of any breaking & can point me in the right direction that would be great, please PM me with any details.

Thanks.

randall977 · 29-10-08, 04:29 PM

I can't help at the moment but I can tell you that any Audi 80/90 Coupe rear axle will fit. I had I put a 1991 rear axel onto my Coupe GT to upgrade it to discs (and repair the rear bushes). It was very easy to do and looked great. Most scrap yards should have a suitable Audi.

sprig · 29-10-08, 04:44 PM

That sounds very promising, So just confirm for me a later model, 86 onwards (b3) will fit ok? I was thinking about that but couldn't really find any info thought it'd be good with the discs on the back. Would it then just a case of changing the handbrake cable & brake lines?

randall977 · 29-10-08, 05:14 PM

Anything upto 1994 I believe but please look carefully before taking anything off. As I remember I didn't have to change the handbrake cables but I did have to make up two short lengths of copper pipe to connect the existing hydraulic system to the new disc brake trailing arm. I fitted new discs and pads and it worked like a dream - took less than a day. Below is the car I upgraded using parts from a 1991 Audi 80 1.8i - it was back in 2001!

Audi-Coupe-GT.jpg

sprig · 30-10-08, 08:42 AM

Thanks for the advice randall very helpful, definately made finding a rear beam less of a headache now I know ^above^ info.......cheers me owd

msh · 30-10-08, 09:17 PM

If u also have idea about brake upgrade - don't forget B3's have 4x108, unlike B2's 4x100 [with some exceptions]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
b3 coupe rear axle	sam	Parts For Sale	0	18-11-09 10:46 PM
help help rear axle/hub	dandan	Parts Wanted	4	25-10-09 10:26 PM
100CS engine and rear axle	Lankytim	Parts For Sale	0	16-08-09 09:39 PM
1982 Audi 200 5T (Type 43) Manual	randall977	Cars For Sale	38	10-11-08 09:53 PM
Audi 80 (B2, type 81) 1982 rear passenger door & rear pasenger side light	sprig	Parts Wanted	1	28-02-08 12:36 AM

29-10-08, 04:29 PM	#2
randall977 Mr Typ 43! Classic Audi Club Member Join Date: Sep 2007 Location: Oxfordshire Posts: 838	I can't help at the moment but I can tell you that any Audi 80/90 Coupe rear axle will fit. I had I put a 1991 rear axel onto my Coupe GT to upgrade it to discs (and repair the rear bushes). It was very easy to do and looked great. Most scrap yards should have a suitable Audi.

29-10-08, 04:44 PM	#3
sprig on the road again! Classic Audi Club Member Join Date: Jan 2008 Location: Burton-on-Trent Posts: 337	That sounds very promising, So just confirm for me a later model, 86 onwards (b3) will fit ok? I was thinking about that but couldn't really find any info thought it'd be good with the discs on the back. Would it then just a case of changing the handbrake cable & brake lines?

29-10-08, 05:14 PM	#4
randall977 Mr Typ 43! Classic Audi Club Member Join Date: Sep 2007 Location: Oxfordshire Posts: 838	Anything upto 1994 I believe but please look carefully before taking anything off. As I remember I didn't have to change the handbrake cables but I did have to make up two short lengths of copper pipe to connect the existing hydraulic system to the new disc brake trailing arm. I fitted new discs and pads and it worked like a dream - took less than a day. Below is the car I upgraded using parts from a 1991 Audi 80 1.8i - it was back in 2001! Audi-Coupe-GT.jpg

30-10-08, 08:42 AM	#5
sprig on the road again! Classic Audi Club Member Join Date: Jan 2008 Location: Burton-on-Trent Posts: 337	Thanks for the advice randall very helpful, definately made finding a rear beam less of a headache now I know ^above^ info.......cheers me owd

30-10-08, 09:17 PM	#6
msh 4 ring whore! Join Date: Jun 2008 Location: Rucava, Latvija Posts: 3,816	If u also have idea about brake upgrade - don't forget B3's have 4x108, unlike B2's 4x100 [with some exceptions]