8 inch ronals

100turbo c · 22-06-08, 12:26 AM

does any one no if you can get these any where , new, old copies or whatever have to be the 8 inch ronals for the quattro cheers,

Octanejunkie · 22-06-08, 11:54 AM

There are Ronals available in 8" wide. Not sure about the classic styles though. Ronal Turbos would be the nicest

ChrisG · 22-06-08, 06:49 PM

think you will find that 8" 16 spoke ronals ( 25mms ET )will rub on the rear arches....... ridden in a 200 version with them and they definately rubbed, although we were going around Castle Coombe at the time, but still a problem the owner said.

100turbo c · 22-06-08, 09:53 PM

ok cheers for that wasnt aware they would rub cheers

ChrisG · 23-06-08, 07:39 AM

Best thing is to see if you can borrow a couple and test on the rear. What about the forged Fuchs that were on the early Quattros and were also fitted to the type 44 100 Sport ??

AlanB · 23-06-08, 12:12 PM

Hi Guys,

The 100/200 quattros have a wider rear track than the 2wd versions, so there is more clearance on the non-quattros.

I am pushed to get 7s on my quattro, (although other cars seem to be fine with them!) so I would guess that 8s would be tight even on a 2wd??

I currently have 7x15 16-spoke Ronals for my 200; basically a 5-stud version of the wheel so popular on the coupe quattros.

Rare, but I have seen a couple of other sets, although they won't be for sale.

AlanB

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15" inch sub enclosure	Gaz	Parts Wanted	15	22-06-09 06:43 PM
2.5 Inch Stainless Coupe Exhaust	DJ.	Parts For Sale	2	06-05-09 07:19 AM
4 x 108 5 spoke alloys 15 inch	Gaz	Parts For Sale	0	24-02-09 01:59 AM
Quality pair of 16 inch chains	Gib	General Chat	0	15-12-08 01:05 PM
17 inch rims for sale	crisarc	Parts For Sale	0	27-03-08 07:02 PM

22-06-08, 11:54 AM	#2
Octanejunkie Grown up member Join Date: Apr 2008 Location: Clevedon, North Somerset Posts: 293	There are Ronals available in 8" wide. Not sure about the classic styles though. Ronal Turbos would be the nicest

22-06-08, 06:49 PM	#3
ChrisG Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: Bracknell, Berks. Posts: 1,465	think you will find that 8" 16 spoke ronals ( 25mms ET )will rub on the rear arches....... ridden in a 200 version with them and they definately rubbed, although we were going around Castle Coombe at the time, but still a problem the owner said.

22-06-08, 09:53 PM	#4
100turbo c Grown up member Join Date: Feb 2008 Location: hampshire in new milton Posts: 350	ok cheers for that wasnt aware they would rub cheers

23-06-08, 07:39 AM	#5
ChrisG Senior Member Classic Audi Club Member Join Date: Dec 2007 Location: Bracknell, Berks. Posts: 1,465	Best thing is to see if you can borrow a couple and test on the rear. What about the forged Fuchs that were on the early Quattros and were also fitted to the type 44 100 Sport ??

23-06-08, 12:12 PM	#6
AlanB Grown up member Join Date: May 2008 Location: Lanarkshire, Scotland Posts: 103	Hi Guys, The 100/200 quattros have a wider rear track than the 2wd versions, so there is more clearance on the non-quattros. I am pushed to get 7s on my quattro, (although other cars seem to be fine with them!) so I would guess that 8s would be tight even on a 2wd?? I currently have 7x15 16-spoke Ronals for my 200; basically a 5-stud version of the wheel so popular on the coupe quattros. Rare, but I have seen a couple of other sets, although they won't be for sale. AlanB