EXIP Alloys As New Stunning **NOW SOLD**

[benlg81]

Hi All

some of you may be aware that I have just got my car back on the road so treated my self to a set of exip wheels, got them fully refurbished in a pewter silver. unfortunatly I forgot to check fitment before going to the expense and it now appears my front stub axel is too big and would require a substantial spacer so they are up for grabs.

The refurb was a full chemical strip followed by a sandblast and then went through the paint tracks and ovens.
as you can see the quality is second to none.

The wheels are:

15x7
ET38
4x108

they have a centre bore currently of 57.1 so ideal for the 4 stud audi's out there and can be opened by a machine shop to the 63.4 needed for fords ect.

They have a lovely dish to them and are a timeless retro design.

All I want back for them is what they owe so they are up for grabs at £275 ono

if you need any more info let me know

Regards

Ben

[benlg81]

few more pics to wet some appetites

anyone up for some old skool?





cheers

ben

[benlg81]

also if anyone needs some brand new tyres i can supply the following at the prices below

205/60/15 h rated enduro 606 - £30.50+vat
205/60/15 v rated enduro 606 - £33.15 + vat
205/60/15 h rated falken ze912 - £35.05 + vat
205/60/15 v rated falken ze912 - £38.82 + vat
205/60/15 v rated firestone tz200 - £46.15+ vat
205/60/15 h rated pirelli 6000 - £52.38 + vat
205/60/15 v rated pirelli 6000 - £58 + vat

if you require them fitting it i will cost an extra £4.50+vat a wheel or i can supply them loose.

cheers

ben

[poopcoupe]

Hi Ben will they fit a 85 GT Coupe type 85, running 14" ronals at mo?

[benlg81]

hi

i think that was around the switch year, from 4x100 to 4x108

my wheels are 4x108 if you have any codes off the back of your current wheels i may be able to tell from that,

Cheers

Ben

[Isimmo]

Originally Posted by poopcoupe

Hi Ben will they fit a 85 GT Coupe type 85, running 14" ronals at mo?

If it's got the later bumpers and sill covers, (eg same body bumpers as a coupe quattro) then it'll be 4x108...

(This shape)..

[Coxy]

hmmm, how nice would they look on a CQ20V instead of scabby speedlines?!?

where abouts are you?

[mikes2]

Originally Posted by Isimmo

If it's got the later bumpers and sill covers, (eg same body bumpers as a coupe quattro) then it'll be 4x108...

Only 5 cylinder cars were 4x108 on big bumper models.

[Emjay]

Originally Posted by poopcoupe

Hi Ben will they fit a 85 GT Coupe type 85, running 14" ronals at mo?

If they are genuine audi ronals you should find the offset and PCD stamped on the inside of the rim so you could verify by taking the wheel off.

I would suspect you are on 4 x 108 judging by the details of your coupe

[benlg81]

i am based in dudley west midlands and the wheels are a 4x108 so perfect for everyone sofar.

any one want any more info?