Brake Servo Audi 90 quattro info required.

Kenquattro · 28-01-14, 09:20 PM

Does anybody on here know if a brake servo from an '88 E plate 90 2.2E (part no 047W 893 612 105B) is suitable for my '88 E plate 90 quattro (part no 037W 894 612 103A)? Not sure if relevant, but the 90 2.2E servo is from a non ABS equipped model.
Thanks in advance.

slacky · 28-01-14, 10:38 PM

Hi Kenny , just been out to check mine & it's 893 612 105B , this was a direct replacement a couple of years ago as mine was failing , been ok so far

Just need to double check if we swapped the rods over ??, something in the back of my mind makes me think we did , I'll ask Dave ????
Cheers

msh · 29-01-14, 07:20 AM

As long as it is not 20v model, it's all the same stuff, regardless of ABS or pot count. IIRC my A90q received master cylinder from A80 1.8 and servo from something similar.

Kenquattro · 29-01-14, 07:42 AM

Thanks fellas. That is what I wanted to hear.

28-01-14, 10:38 PM	#2
slacky 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Location: wirral Posts: 4,452	Hi Kenny , just been out to check mine & it's 893 612 105B , this was a direct replacement a couple of years ago as mine was failing , been ok so far Just need to double check if we swapped the rods over ??, something in the back of my mind makes me think we did , I'll ask Dave ???? Cheers __________________ *90q-Cab.2.3E-Ur-S6-b2-80 Sport* Member 111 Last edited by slacky; 28-01-14 at 10:41 PM.

29-01-14, 07:20 AM	#3
msh 4 ring whore! Join Date: Jun 2008 Location: Rucava, Latvija Posts: 3,816	As long as it is not 20v model, it's all the same stuff, regardless of ABS or pot count. IIRC my A90q received master cylinder from A80 1.8 and servo from something similar.

29-01-14, 07:42 AM	#4
Kenquattro 4 ring whore! Classic Audi Club Member Join Date: Nov 2007 Posts: 6,267	Thanks fellas. That is what I wanted to hear.