Wazzing into a force 9 gale!!!

Tonks4x4 · 07-06-10, 08:17 PM

Hi chaps, I am still looking in vein for an original bit of shorty!!!!
Its the white bit pictured on the front of this assembly. If anyone can help with either pointing me in the right direction or if one can be borrowed for reproduction that would be great.

Brian

wildoliver · 07-06-10, 08:54 PM

Hi Brian I had those bits off you this week for the T85.

It looks pretty simple to make to be honest, it appears with a pipe bending machine and some at a guess 1" by 0.5" steel square tube and a bit of welding such a piece could be made.

If you get stuck and can either make a prototype roughly or get engineering drawings or one to copy then I'll be happy to help making some up and outsourcing any jobs that are beyond me, I have some good contacts with local engineering companies.

Steve · 07-06-10, 09:08 PM

I could probably do with one of those as well.

Tonks4x4 · 07-06-10, 09:11 PM

Don't worry Steve. All the bits I have found so far have been reproduced to a very high standard.

So when it's time to do my next one, all the parts will be on the shelf

Puglife · 07-06-10, 10:39 PM

Its aluminium, I dont have one but I may be able to access measurements to reproduce one. Brian I'll send a few emails and get back to you.

07-06-10, 10:39 PM	#5
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	Its aluminium, I dont have one but I may be able to access measurements to reproduce one. Brian I'll send a few emails and get back to you. __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

07-06-10, 08:54 PM	#2
wildoliver Grown up member Join Date: Feb 2009 Posts: 436	Hi Brian I had those bits off you this week for the T85. It looks pretty simple to make to be honest, it appears with a pipe bending machine and some at a guess 1" by 0.5" steel square tube and a bit of welding such a piece could be made. If you get stuck and can either make a prototype roughly or get engineering drawings or one to copy then I'll be happy to help making some up and outsourcing any jobs that are beyond me, I have some good contacts with local engineering companies.

07-06-10, 09:08 PM	#3
Steve Grown up member Join Date: Nov 2007 Posts: 355	I could probably do with one of those as well.

07-06-10, 09:11 PM	#4
Tonks4x4 4 ring whore! Classic Audi Club Member Join Date: Oct 2008 Location: Huthwaite, Nottinghamshire Posts: 2,607	Don't worry Steve. All the bits I have found so far have been reproduced to a very high standard. So when it's time to do my next one, all the parts will be on the shelf