pug alloys on a CQ?

Gaz · 15-01-09, 01:03 AM

a m8 has offered me his wheels off his sierra xr 4x4.

But the thing is, they are originally off a pug.. Will they fit my CQ?

He's fitting some lowered sprigs & shocks to his car at the weekend and thinks the wheels will foul the arches as they stick out quite a lot.

I won't say how much, but they are cheap... ok i will. 80 quid lol

+ they have been freshly powder coated.

they're 15's.

What u think? is there room under a CQ from them? I'm not sure what the pug offset is? also Is there a suitable spigot ring if they need them?

Puglife · 15-01-09, 10:55 AM

what peugeot are they off? 106gti offset is ET18 i think.... 205gti is ET20. The bolt pattern should be 4x108.

If they dont fit i may be interested in them for my 205gti

Martc · 15-01-09, 12:00 PM

PCD is 108 for a CQ, standard 14 inch R8 Ronals are ET45, 15 inch ronal R8 are either an ET of 42 or 37.

PeterB · 15-01-09, 12:51 PM

I think the pcd will be different on the Ford unfortunately.
At least that is what I found when trying some Ford alloys on my Golf some years back (If the Golf has the same pcd as the Coupe).

90Quattro · 15-01-09, 01:32 PM

Should fit if the centre spigot is correct bore. I'd try them and see

gabriel.oconnell · 15-01-09, 02:34 PM

i think you find these alloys will fit more 4 stud audi coupe too as i got 17in on my coupe and same stud pattern

Puglife · 15-01-09, 02:36 PM

not so much the PCD thats the problem as 4x108 is a common PCD.... the centre bore and ET are the problems with wheel fitment.

15-01-09, 10:55 AM	#2
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	what peugeot are they off? 106gti offset is ET18 i think.... 205gti is ET20. The bolt pattern should be 4x108. If they dont fit i may be interested in them for my 205gti __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

15-01-09, 01:32 PM	#5
90Quattro 4 ring whore! Classic Audi Club Member Join Date: Oct 2007 Location: Hampshire / Stoke-on-Trent Posts: 2,319	Should fit if the centre spigot is correct bore. I'd try them and see __________________ 90 Quattro Project http://www.classic-audi.co.uk/forum/...read.php?t=235 Passat 130 Sport http://www.classic-audi.co.uk/forum/...5830#post15830SOLD http://www.helpforheroes.org.uk/ www.armedforcesrallyteam.com

15-01-09, 02:36 PM	#7
Puglife ==>PUGSPORT!<== Classic Audi Club Member Join Date: Jan 2008 Location: Leyland Posts: 1,544	not so much the PCD thats the problem as 4x108 is a common PCD.... the centre bore and ET are the problems with wheel fitment. __________________ 1986 UR Quattro - (1982) Lombard RAC Group 4 recreation - #24 H.Demuth/J.Daniels 1981 VW mk1 golf GTi - now 5cylinder and RWD.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New alloys	Steve90q	Wheels & Tyres	1	28-01-10 10:15 PM
B5 -S4 alloys	slacky	General Chat	0	03-09-09 03:00 PM

15-01-09, 12:00 PM	#3
Martc Black Coupe Collector Classic Audi Club Member Join Date: Feb 2008 Location: Towcestershiresheer Posts: 2,934	PCD is 108 for a CQ, standard 14 inch R8 Ronals are ET45, 15 inch ronal R8 are either an ET of 42 or 37.

15-01-09, 12:51 PM	#4
PeterB You absolute shower! Classic Audi Club Member Join Date: Jul 2007 Location: The Chester Posts: 1,444	I think the pcd will be different on the Ford unfortunately. At least that is what I found when trying some Ford alloys on my Golf some years back (If the Golf has the same pcd as the Coupe).

15-01-09, 02:34 PM	#6
gabriel.oconnell 4 ring whore! Classic Audi Club Member Join Date: Jun 2008 Location: brynmawr Posts: 3,243	i think you find these alloys will fit more 4 stud audi coupe too as i got 17in on my coupe and same stud pattern