Urquattro - Oil Temperature Sender

andybuzz · 21-08-09, 07:11 AM

Does any one have a Oil temperature Sender for a 1986 urquattro (WR) for sale.
I am having trouble sourcing one of these and I wonder if someone on this forum could help - Many thanks in advance!
I also understand that the same sender was also fitted to the early five cylinder engines in the range i.e 80s 90s 100s 200s Coupes etc ( Non Hydraulic)
The sender that I am looking for has a M18 thread and not the M22 thread which is more common on later models

Thanks again

amanda · 21-08-09, 07:20 AM

Try your local dealer or Pete Reeves at www.quattrocorner.com

Isimmo · 21-08-09, 07:41 AM

Hi Andy, nice to see you again the other week at CC... This is The Family Album page for the engine/head sensors... The Dual Temp Sender for your WR should be 056 919 369P, but I'd confirm this first.

Had a quick look at a few other models and the sensor hasn't shown up any commonality.

So I'd guess you've long since tried the other routes and found NLA...

VBR

Ian

Isimmo · 21-08-09, 07:52 AM

Just had another rummage...

This is the 86 Coupe page

Can't find a reference to any M18 threaded oil temp senders though... Closest is the M22 on a RR (as you insinuated)...

This is the 81 Coupe page... It's the same page...

amanda · 21-08-09, 07:55 AM

Ahhhhh that one Ian

Now I did some investigation last year, it seems it is fitted to some poxsters and was available from them last year

Cannot remember which model though except that it was an 85 turbo one, best taking it down to your local poxster dealers with said temp sensor in hand and ask please can I have 1 of these please

IIRC was about £30 ish

Cornholio · 21-08-09, 08:36 AM

I bought a new oil pump recently, and it came with idler roller, crank seal,and the temp sensor already installed......

andybuzz · 21-08-09, 09:40 AM

Part I require is NLA, thats why I am trying on here!
Steve - The part I require is No 14 on the Microfiche

Cornholio · 21-08-09, 09:57 AM

On the UR parts diagram it's item 7

http://www.t85q.com/urTfa/Subgroups/engine.html

On the CQ / GT, it's also item 7

http://www.kvquattro.com/tfa/engine_oil_pump.htm

Or is yours one of the ones that screws in the side of the block?

Isimmo · 21-08-09, 10:00 AM

This one... (but as an M18)... (which it doesn't show)...

Sorry it's on the engine diagrams rather than electrical on the Ur for some reason...

lol....Oopss Beaten to it...

Cornholio · 21-08-09, 10:02 AM

Do you have the link for that, our filtering software (at work ) tends to remove images from Forum pages........

21-08-09, 07:20 AM	#2
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Try your local dealer or Pete Reeves at www.quattrocorner.com __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

21-08-09, 07:41 AM	#3
Isimmo Super Moderator Classic Audi Club Member Join Date: Jul 2007 Location: Sissix-by-the-sea Posts: 15,218	Hi Andy, nice to see you again the other week at CC... This is The Family Album page for the engine/head sensors... The Dual Temp Sender for your WR should be 056 919 369P, but I'd confirm this first. Had a quick look at a few other models and the sensor hasn't shown up any commonality. So I'd guess you've long since tried the other routes and found NLA... VBR Ian __________________ 1985 WR quattro, 1985 20vT RallyRep, 1993 MTM ABY S2 Avant. 2010 S3 Sportback.

21-08-09, 07:52 AM	#4
Isimmo Super Moderator Classic Audi Club Member Join Date: Jul 2007 Location: Sissix-by-the-sea Posts: 15,218	Just had another rummage... This is the 86 Coupe page Can't find a reference to any M18 threaded oil temp senders though... Closest is the M22 on a RR (as you insinuated)... This is the 81 Coupe page... It's the same page... __________________ 1985 WR quattro, 1985 20vT RallyRep, 1993 MTM ABY S2 Avant. 2010 S3 Sportback.

21-08-09, 07:55 AM	#5
amanda quattro hussie!! Classic Audi Club Member Join Date: Jul 2007 Location: doin' it on all fours!! Posts: 5,993	Ahhhhh that one Ian Now I did some investigation last year, it seems it is fitted to some poxsters and was available from them last year Cannot remember which model though except that it was an 85 turbo one, best taking it down to your local poxster dealers with said temp sensor in hand and ask please can I have 1 of these please IIRC was about £30 ish __________________ Mystic blue m3 ghay hairdresser mobile 4 sheds 1 shopping trolley Gti RS6 ...my baby

21-08-09, 10:00 AM	#9
Isimmo Super Moderator Classic Audi Club Member Join Date: Jul 2007 Location: Sissix-by-the-sea Posts: 15,218	This one... (but as an M18)... (which it doesn't show)... Sorry it's on the engine diagrams rather than electrical on the Ur for some reason... lol....Oopss Beaten to it... __________________ 1985 WR quattro, 1985 20vT RallyRep, 1993 MTM ABY S2 Avant. 2010 S3 Sportback.

21-08-09, 08:36 AM	#6
Cornholio Grown up member Join Date: Jul 2007 Posts: 555	I bought a new oil pump recently, and it came with idler roller, crank seal,and the temp sensor already installed......

21-08-09, 09:40 AM	#7
andybuzz Newbie! Join Date: Jul 2009 Posts: 3	Part I require is NLA, thats why I am trying on here! Steve - The part I require is No 14 on the Microfiche

21-08-09, 09:57 AM	#8
Cornholio Grown up member Join Date: Jul 2007 Posts: 555	On the UR parts diagram it's item 7 http://www.t85q.com/urTfa/Subgroups/engine.html On the CQ / GT, it's also item 7 http://www.kvquattro.com/tfa/engine_oil_pump.htm Or is yours one of the ones that screws in the side of the block?

21-08-09, 10:02 AM	#10
Cornholio Grown up member Join Date: Jul 2007 Posts: 555	Do you have the link for that, our filtering software (at work ) tends to remove images from Forum pages........

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The temperature inside your car??	Coxy	General Chat	16	09-11-09 11:43 PM
Oil Sender	Booty	Parts Wanted	2	29-03-08 10:38 AM
Oil Temperature Sensor	krzracingcouk	Parts Wanted	7	20-11-07 03:47 PM