B2 window regulator M6 rubber mounts

andya · 05-10-17, 04:23 PM

As per title - their the ones that fix the motor to your door - on each side there are 2x 10mm thick rubbers and 1x 16mm. The original ones are hexagonal.

Does anyone know where to source them from?

sinbin5t · 05-10-17, 05:02 PM

Do you mean the bobbins a bit like radiator mounts ? if so try these :-

ANTI-VIBRATION COMPONENTS

antivibrationcomponents.co.uk

Tel :- 0845 850 99 40

andya · 05-10-17, 05:11 PM

Yes those are the ones, I was trying to remember the name of them - bobbins!

Great, thanks I'll try them. I dropped into a local firm to me this afternoon, probably a similar firm - they didn't have anything small enough, nor strong enough, majority of mounts were much softer.

Davids · 05-10-17, 05:29 PM

Quote:

Originally Posted by andya

Yes those are the ones, I was trying to remember the name of them - bobbins!

Great, thanks I'll try them. I dropped into a local firm to me this afternoon, probably a similar firm - they didn't have anything small enough, nor strong enough, majority of mounts were much softer.

Not sure if this idea is any good when I needed some similar rubber mounts with a stud each side for the Cobra fan mount I used radio controlled engine mounts.
something like this

https://www.ebay.co.uk/p/4pcs-M6-Ant...d=252674655932

loads of choices, not sure if they are any good or not
Cheers

David

moonwatcher · 05-10-17, 05:37 PM

Quote:

Originally Posted by Davids

Not sure if this idea is any good when I needed some similar rubber mounts with a stud each side for the Cobra fan mount I used radio controlled engine mounts.
something like this

https://www.ebay.co.uk/p/4pcs-M6-Ant...d=252674655932

loads of choices, not sure if they are any good or not
Cheers

David

I've used these on my MK1 TT to mount the fuel pump, filter etc.
spot on

sinbin5t · 05-10-17, 06:21 PM

Quote:

Originally Posted by andya

Yes those are the ones, I was trying to remember the name of them - bobbins!

Great, thanks I'll try them. I dropped into a local firm to me this afternoon, probably a similar firm - they didn't have anything small enough, nor strong enough, majority of mounts were much softer.

I got a catalogue from them, they do any size and i got some for my 5T, unlike a lot of these bobbins you can tighten these up and slacken them as many times as you want without damage.

andya · 05-10-17, 07:38 PM

Quote:

Originally Posted by sinbin5t

I got a catalogue from them, they do any size and i got some for my 5T, unlike a lot of these bobbins you can tighten these up and slacken them as many times as you want without damage.

Thanks everyone for their input. Really appreciate it

sinbin5t · 05-10-17, 07:45 PM

Hope you get sorted wherever you go for them.

05-10-17, 05:11 PM	#3
andya Senior Member Classic Audi Club Member Join Date: Aug 2010 Location: Hampshire Posts: 1,149	Yes those are the ones, I was trying to remember the name of them - bobbins! Great, thanks I'll try them. I dropped into a local firm to me this afternoon, probably a similar firm - they didn't have anything small enough, nor strong enough, majority of mounts were much softer. __________________ 1985 Coupe Quattro 1986 Coupe 1.8 weber carb 1987 Coupe 2.2 GT

05-10-17, 05:02 PM	#2
sinbin5t 4 ring whore! Classic Audi Club Member Join Date: Jan 2010 Location: Where a spike points skywards Posts: 12,960	Do you mean the bobbins a bit like radiator mounts ? if so try these :- ANTI-VIBRATION COMPONENTS antivibrationcomponents.co.uk Tel :- 0845 850 99 40

05-10-17, 07:45 PM	#8
sinbin5t 4 ring whore! Classic Audi Club Member Join Date: Jan 2010 Location: Where a spike points skywards Posts: 12,960	Hope you get sorted wherever you go for them.