Quattro seats or similar

dazzer · 19-05-11, 08:58 AM

Hi Guys

I'm looking for some good condition early Quattro seats or similar.

They are for a 1958 DKW/Auto union project. I'm basically looking for something that will hold me in place better than the armchairs currently in situ but I wanted to stick with the Audi theme and quality.

Space is not a problem and if I was to be really fussy light coloured /grey/tan/blue would be ideal. If the seats had the Audi rings logo on wow!

Can be very early Audi seats if they offer support.

Pics of current seats/space and project they're going into.

Many thanks for any ideas on the options.

pimpdriver · 19-05-11, 09:54 AM

Possibly got a full interior from a 1990 audi 100 available soon.

Decent side bolsters and very comfy.

Very similar to these:

In Wiltshire.

dazzer · 19-05-11, 11:02 AM

Hi

Thanks for the photos I will certainly bear these in mind, colours good.

Would you know if they fix flat to the floor pan (or is it a contoured floor pan?) and are the seat belt fixings integral, if so can they be removed? and finally is there any electric/tech gubbings that I would need to remove?

Thanks

rich.r · 19-05-11, 04:27 PM

p m sent

pimpdriver · 22-05-11, 02:01 PM

here are mine. Being scrapped at end of week (no space to store, I'm afraid).

They are fitted to runners so are not flat bolt to the floor (but I'm sure if you can weld, something could be done).

£50 for both front seats, and the rear bench, and seat belt receivers (bolted to front seats).

Collect from Calne, Wiltshire, by end of week.

Steve 07971 661221

dazzer · 26-05-11, 05:53 PM

Seats now sourced

Thank you

19-05-11, 09:54 AM	#2
pimpdriver Devon Pastie Muncher Classic Audi Club Member Join Date: Jul 2007 Location: Calne Wiltshire Posts: 7,530	Possibly got a full interior from a 1990 audi 100 available soon. Decent side bolsters and very comfy. Very similar to these: In Wiltshire. __________________ Winter tyres now! Driving the B2 80CL as a daily and LOVING it!!!!

22-05-11, 02:01 PM	#5
pimpdriver Devon Pastie Muncher Classic Audi Club Member Join Date: Jul 2007 Location: Calne Wiltshire Posts: 7,530	here are mine. Being scrapped at end of week (no space to store, I'm afraid). They are fitted to runners so are not flat bolt to the floor (but I'm sure if you can weld, something could be done). £50 for both front seats, and the rear bench, and seat belt receivers (bolted to front seats). Collect from Calne, Wiltshire, by end of week. Steve 07971 661221 __________________ Winter tyres now! Driving the B2 80CL as a daily and LOVING it!!!!

19-05-11, 11:02 AM	#3
dazzer Newbie! Join Date: May 2011 Posts: 9	Hi Thanks for the photos I will certainly bear these in mind, colours good. Would you know if they fix flat to the floor pan (or is it a contoured floor pan?) and are the seat belt fixings integral, if so can they be removed? and finally is there any electric/tech gubbings that I would need to remove? Thanks

19-05-11, 04:27 PM	#4
rich.r Senior Member Join Date: Jul 2010 Posts: 1,832	p m sent

26-05-11, 05:53 PM	#6
dazzer Newbie! Join Date: May 2011 Posts: 9	Seats now sourced Thank you