Waterpump and thermostat replacment time

jamiecoysh · 13-03-15, 08:47 PM

Can anyone tell me how long the following jobs should roughly take at a garage

the engine is a 1989 2.0 8v engine code 3A

waterpump and thermostat replacement ( removal refit )

testing of old pump and stat

test flow through heater matrix

test cooling fan

bleed cooling system

liquid pressure test cylinder head ( put bottle thing in oil filler cap with fluid and if it changes colour shows head problems

cheers

missfire · 13-03-15, 09:05 PM

What's happened? Big bill? Don't know if it's much different to the 1.8 8v? But I did timing belt and water pump on mine in about 45 minutes I think. Matrix you just stick a hose pipe into it don't you? Testing stat takes ten minutes in a pan of water, testing fan could take ten seconds, depending what they were testing.

Maybe 2-3 hours garage time at most? Don't know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13-03-15, 09:05 PM	#2
missfire making wooden things Classic Audi Club Member Join Date: Dec 2009 Location: cow land Posts: 8,156	What's happened? Big bill? Don't know if it's much different to the 1.8 8v? But I did timing belt and water pump on mine in about 45 minutes I think. Matrix you just stick a hose pipe into it don't you? Testing stat takes ten minutes in a pan of water, testing fan could take ten seconds, depending what they were testing. Maybe 2-3 hours garage time at most? Don't know.