Thread: B4 brakes
View Single Post
Old 09-12-17, 12:01 AM   #7
quattrodave
Grown up member
Classic Audi Club Member
 
Join Date: Dec 2010
Location: Bingley
Posts: 459
Default

Pump the pedal method usually works better than bleeder tool (be that a push with air pressure or a vacuum pull tool) bit daft but have to ask you have you checked that the master cylinder is actually pushing fluid through both circuits as could be faulty on one of them ?

In fact have you bled the master cylinder if its got a bleed valve, you would need to do this if fluid went too low and a chamber emptied.

Last edited by quattrodave; 09-12-17 at 12:04 AM.
quattrodave is offline   Reply With Quote