Quote:
Originally Posted by swb quattro
not to hard a job
open bonnet remove bolts along top of wing
open door remove screw at corner of screen pillar
Jack up remove wheel locate bolts usually covered in sealant maybe need to remove arch liners if fitted bolts located under Meath nearest the door
remove bolts holding wing to fron panel
cut sealant in joint of front panel
pull like **** if your replacing them won't matter if you destroy them
oops I think there's a fixing at the bottom of the wing at the sill as well ages since I've done one
easy
|
Exactly as stated.... and the gloop/sealant is good stuff so make sure you have a good few quid available for the swear jar when/if the wings don't want to move..