You're listening about S2 stuff because that's the only old B series car with 5x112 - meanwhile I live in a country where metalworking tools are rather available and therefore NONE uses S2 running gear parts, as they are hard to come by, obviously.
Rear axle, IIRC, required B5 parts - for quattro I'm 100% sure that the thing needed was B5q hubs and brake discs - probably for FWD it's similar. Front hubs usually require some turning, depending on size and parts choice - parts chosen usually are from C4 or B5 - in case of 75 mm hubs, what should be your case, suitable B5 hubs might even fit. I cannot give concrete info because I'm not very interested in that - I have B5q rear hubs and discs in my possesion and if I'll really fit them one day, for the front I'll find something from C4 that will mate with my 82 mm CV joints and the rest of work will be up to turner.
|